ZBAITU F80W Laser Engraving Cutting Machine M37 DIY Engraver Cutter Printer Wood. ZBAITU laser engraving machine is the first to develop air-assisted nozzle laser head. Our laser-assisted interface has been upgraded to provide faster, better and clearer engraving and cutting effects.ZBAITU A40 laser engraver use 1 diode laser, it has an ultra-fine 0.08mm sharp laser focus, with super cutting penetration and precision, can cut up to 20mm thick wood, 10mm black acrylic, carve ceramics and stainless steel. Combines a fixed focus lens and a sliding design. You only need to slide the laser and tighten the screws to complete the focusing. This makes it very easy to use. Solid & Easy Assembly Structure. The Laser cutting machine is full-metal structure design makes the machine work stably, and improves the engraving accuracy.
The assembly can be completed in 10-20 minutes. It will have longer service time. Support SD Card Offline Working. To solving the problem of connection breaking off suddenly, we add the offline working function, you can put the file to the SD card, then start engraving or cutting without keeping the equiment connect with PC. The laser filter cover filters 98% of the ultraviolet light to the eyes.
Even though, we do not recommend you to look directly at the laser for long periods of time. Continuous Work for Long Time. This laser engraving machine is equipped with a high-speed fan to reduce the temperature of the module, make machine can continue to work for more than 12 hours. This Laser machine is compatible with various mature engraving software, such as LaserGRBL, LightBurn, compatible with Windows XP/7/8/10/11 (LaserGRBL), and also compatible with Mac system (LightBurn), compatible with file format engraving with NC, BMP, JPG, PNG, DXF, etc.Engraving Materials: Wood, paper, cardboard, plastic, white, PCB board, aluminum oxide, 304 Stainless steel, ceramic, dark stone. Cutting Material: Wood, acrylic, cardboard, fabric, bamboo, plastic board, KT board. Focusing Method: Fixed focus laser + sliding device. Laser Protective Cover: The light filter cover on the laser protects the user's eyes and prevents animals grabing the laser spot.
Operating Software: Compatible with LaserGRBL, LightBurn. Operate System: Supported file formats NC, BMP, JPG, PNG, DXF and other image formats. Data Transmission Method: USB connection. Power Supply: International universal standard power input: 100-240V AC, 50/60HZ output: 12V/24V 5A.Please wear laser safety goggles when using the product to protect your eyes from the direct laser beam. Smoke will be generated when burned, please pay attention to indoor smoke exhaust.
Protect yourself from the laser when you operate on it. Any question about the product, just let us know. We are always ready and will try our best to help you! The images shown are for your reference only. We accept Alipay, West Union, TT.
Except some countries and APO/FPO. Ed by the carrier, excluding weekends and. Transit times may vary per different countries and regions, particularly during the. We will track the order. Reply you as soon as possible.
GUARANTEE and RETURN and REFUED. It is deemed that you have accepted and. N case it is defective, please inform us within 3 days after receiving it. Specific reason for the return, and you order number. Q: 20w/40w/50w/60w/80w is the higher the better of number?A: In fact, 20w/40w/50w/60w/80w is only the output power of the machine, not the key to determining the engraving/cutting effect. The output power of the laser module is the key point. If the output power of an engraving machine is 60W, and the output power of the laser module is 55.5w, That's effect is not much different from that of a machine with a 40W output power and 55.5w laser module output power. You can choice which meet your needs. Q: Why is the title says 80W, 40W, but the Laser is 10W or 5W? A: 80w 40W is the effective power of Laser machines, its actual laser output power should be 10W/5W. Q: Why you do you not update your software?
A: We do not sell any software, it just can be work with the machine, we can guide customer how to use it but do not have any way to update it. Q: Why I do not get a reply? A: Please pay attention to confirm that you are contact with. Q: Is it possible to engrave metal?
A: Yes, the ZBAITU laser Engraver uses compressed spot technology with a spot size of only 0.08mm and supports engraving stainless steel and various coated metals. Q: Can this machine only cut dark acrylic? A: Yes, the laser cutter can cut dark acrylic, but not transparent acrylic. Q: Is there user manual?A: Yes, there are user manual in paper in the box, also some assembly videos. A: Of course, ZBAITU0415 Store provide 100% satisfied for sure, you can enjoy 1 year of free replacement for any accessories. All of our products comply with international quality standards and are greatly appreciated by customers all over the world. We would like to provide the best Laser Engraver Equipment and Service for you.
Welcome to share your any ideas with us! This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving".The seller is "zbaitu0415" and is located in this country: CN. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.