X-Carve Laser Kit with 3D Printing & Engraving Laser Head 450nm, 6W CNC machines

X-Carve Laser Kit with 3D Printing & Engraving Laser Head 450nm, 6W CNC machines
X-Carve Laser Kit with 3D Printing & Engraving Laser Head 450nm, 6W CNC machines
X-Carve Laser Kit with 3D Printing & Engraving Laser Head 450nm, 6W CNC machines
X-Carve Laser Kit with 3D Printing & Engraving Laser Head 450nm, 6W CNC machines
X-Carve Laser Kit with 3D Printing & Engraving Laser Head 450nm, 6W CNC machines
X-Carve Laser Kit with 3D Printing & Engraving Laser Head 450nm, 6W CNC machines
X-Carve Laser Kit with 3D Printing & Engraving Laser Head 450nm, 6W CNC machines
X-Carve Laser Kit with 3D Printing & Engraving Laser Head 450nm, 6W CNC machines
X-Carve Laser Kit with 3D Printing & Engraving Laser Head 450nm, 6W CNC machines

X-Carve Laser Kit with 3D Printing & Engraving Laser Head 450nm, 6W CNC machines

X-Carve Full Kit with PLH3D-6W-XF. Full set including all parts needed to mount the PLH3D-6W-XF laser head on the InventablesX-Carve machine. Set is including: LaserDock, PLH3D Series Adapter, Air Nozzle, X-Carve holder, lens and 450nm Safety Goggles with CE certificate.

PLH3D-6W-XF accepts 0-10V TTL/PWM signal generated by X-Controller. 40 x 55 x 78 mm.

0,1 x 0,1 mm. 0,1 x 0,125 mm.

0.1 x 0.3 mm. 210 g 7.4 oz. M3 x 0.5 x 4.5 mm. 0 - 45°C (32 - 113°F).

4 Holes 24 x 15 mm 0.94 x 0.59 in. Included parts - PLH3D-6W-XF Laser Head - PLH3D Series Adapter for X-Carve Machine - PLH3D Docking Station - PLH3D-6W Nozzle - X-Carve Holder - Safety Goggles - Beam Focus Adjuster - 2 Lenses Advantages of the PLH3D 6W: - Simple installation in 3D printers and CNC machines - Accepts a wide range of power supplies - No additional cooling required - Driver integrated inside the laser head - Compatible with accessories for ease of use - OEM customization available for of 3D printer and CNC machine companies Functionality The focus distance can be quickly set or changed via the included lens adjuster (no additional tools). The driver of the unit is integrated directly on the laser head.

This greatly increases the maximum modulation frequency and allows longer cables to be used. Control Inputs The laser head has two separate controls. Input #1 accepts 0 - 5V for analog power modulation.

Input #2 accepts 0 - 24V for TTL/PWM and turns on the laser when the voltage exceeds 2.5V. (Input #1 can also be used for PWM if #2 is dedicated for TTL only). Improved Heat Sinking This lightweight 220g (7.8oz) laser head requires no additional cooling. The body acts as a heat sink, and the fan design allows it to function as an air nozzle protecting the lens from smoke, while also cooling the laser head.

Performing tests on several prototype designs allowed us to optimize the heat sinks shape and enable efficient cooling while maintaining the modules notably small form factor. Accessory for Smoke The laser head allows engraving or cutting of materials such as wood, stainless steel, paper, leather, cardboard and many others. For materials that generate smoke when engraved or cut, we offer an optional nozzle that is attachable to the front of unit via magnets built into the laser head (see accessories). Protections The PLH3D 6W incorporates a thermal protection system that protects the laser diode from overheating to maintain its lifetime.

The unit is designed to automatically shut off when the housing temperature exceeds 47C. The analog input is protected by a 5V Zener diode in case on occasion there appears the voltage higher than 5V. Despite everything, this input should not be used with higher voltages due to risk of damage. The laser diode is protected via a Schottky diode, which protects it from a reverse voltage and ESD. In addition, the integrated driver is fully covered to protect it from metal chips in a CNC machine environment. Compatibility Our PLH3D series work with many CNC and 3D printing machines including the models: - Azteeg X3 - CNC Shark - GeckoDrive 540 - Lulzbot - MakerBot Replicator1 and Clones - MakerBot Thing-O-Matic - MakerGear M2 - MakiBOX - MYDIYCNC - Openbuilds C Beam/OX - PrintRBot Upgrade - Replicator 2 and 2X - RepRap Melzi Board - RepRap RAMPS1.4 - RepRap RUMBA - Rigidbot - Shapeoko 2 - Shapeoko 3 - Solidoodle - Stepcraft - Ultimaker 1 & 2 - Velleman K8200 - X Controller - X-Carve Upgrade - Zen Toolworks Note that this list is being continuously updated. Customization For bulk orders, the PLH3D series can be customized to all customers' needs. We can add customers' logos and all possible additional features. Customization is offered for 3D printer and CNC manufacturers and distributors. Alternative functionality Besides the standard functionality, the small beam spot allows the possibility of using this product for rapid PCB prototyping. This is done by illuminating copper layer of plates after a photosensitive paste is applied. Caution: Remember that it is not a toy. Laser radiation is dangerous even when scattered or reflected from any surface. Always use proper protection laser filter on your CNC machine dedicated to 430 - 480nm in order to avoid reflected radiation. Never point laser head at people or animals. Do not touch the beam, it may cause burns or other injury. Do not stare at the beam or the beam spot while the material is being cut.

Laser radiation - Avoid eye or skin exposure to direct or scattered radiation. The item "X-Carve Laser Kit with 3D Printing & Engraving Laser Head 450nm, 6W CNC machines" is in sale since Wednesday, September 5, 2018. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Woodworking Equipment\Other Woodworking Equipment". The seller is "optlasers-com" and is located in Bialystok.

This item can be shipped worldwide.


X-Carve Laser Kit with 3D Printing & Engraving Laser Head 450nm, 6W CNC machines


Home   Sitemap   Contact   Privacy Policy   Terms of Use