TTS-55: Updated version of TT-5.5S. Laser power: 5.5W, Machine input power : 20W.
Replaceable laser module, can install other modules to get different laser power. TTS-55 can not only engrave different material including wood, plastic, paper, bamboo, ox Horn, leather, sponge paper, but also engrave glass and metal (The effect is not as good as wood carving). Use LaserGRBL or LightBurn (It's the most popular paid carving software in the world, very easy to use).Supports Windows XP, 7, 8, 10(Use LaserGRBL), Mac OS, and Linux(Use LightBurn). Ordinary laser spot is 0.16mm and compressed spot is 0.08mm. With the same power, the smaller the spot, the more concentrated the energy. Which reduces the engraving time. Compared with other brands of engraving machines, the 5.5W compressed spot laser has stronger engraving capabilities.
It can be engraved directly on 304 stainless steel without blackening. It can engrave matte stainless steel at high speed.
The engraving speed is more than 10 times faster than other brands of lasers. Good at fast cutting, can cut wood boards from 3mm to 8mm, and the engraving depth is 0.5mm to 3mm, and the traces after cutting are finer. (TTS-25-7.5W is good at picture engraving). TTS-55- 20W is higher power and supports a faster engraving and cutting.
Free software, support windows xp, 7, 8, 10. Paid software, support windows, mac os, linux. What is the difference between the Twotrees TTS-25 and TTS-55? TTS-25 and TTS-55 have different laser modules.
TTS-25, laser power: 2.5W, machine output power: 20W, mainly used for engraving. Can engrave wood, plywood, acrylic, paper, kraft paper, leather, anodized aluminum, MDF, etc. Laser can cut 2mm plywood, 0.7mm leather. TTS-55, laser power: 5.5W (compressed spot), machine output power: 40W, for engraving and cutting.
The laser with compressed spot has stronger engraving and cutting ability, it can engrave stainless steel, cobblestone, painted metal. The laser can cut 5mm plywood, 3mm acrylic board. How to assemble the machine and wiring. Customers can follow the instructions on this product page or the assembly video to complete the assembly. What functions can be upgraded with TTS-25 and TTS-55?
Thanks to the powerful 302-bit motherboard, TTS-25 and TTS-55 can. Upgrade vibration switch, flame sensor, air assist system, limit switch, screen operation. In addition, we also have an aluminum extrusion upgrade kit, which can upgrade the engraving area to 420400mm. We always believe, good products will be seen!
Considered customer's needs, we spend a lot of time testing various Laser engravers, just to show the best products. Compatible with Y-axis rotary roller.Perfect for most desktop laser engravers where you can adjust the Z-height or reposition the base to provide the necessary clearance for the rollers. Flexible setting: 5 roller positions, each 15mm apart. The setting range is 30-90mm. Supported workpiece dimensions: Cylinder diameter 22-125mm, length 20-220mm. Synchronous dual motors make the Y-axis drive smoother. (Other brands of machines that use a single motor drive will have one-sided lag when moving). The left and right Y-axis extrusion is driven by 4 POM wheels, which are quiet at high speed, light in weight and small in inertia, suitable for high-speed engraving. Easy expansion of the engraving area. The extension set lengthens the y-axis to make it optimal. High cost performance large area laser engraving machine, using. Maximum expansion area from left 420mm to 400mm. Add lifting device, adjust up and down stroke(0-40mm), more easier to engrave.
The belt tensioner can better adjust the X axis belt tightness, can be better to control engraving accuracy. 4 profiles with digital scale markings, very clear and easy to measure the size of the item being engraved.
The bellows manages the direction of the cable, making it safer for the machine to move without damaging the cable. LaserGRBL, LightBurnsupport Win XP / Win 7 / Win 8 / XP / Win 10 system. NOTE:Macbook can only use LightBurn program. All wood, bamboo, paper, plastic, leather, PCB board, aluminum oxide, non-reflective plating and lacquered metal. Cardboard, non-woven fabric, light wood, Acrylic material, thin plastic board.
We : 50% (Other brand : 0%). Do not support offline TF card, support online. Temperature 5-40 degrees Celsius, humidity 20-60%RH. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving".
The seller is "mikpepper-0" and is located in this country: US. This item can be shipped to United States.