USA Monport 150W 40 x 64 CO2 Laser Engraver Autofocus Laser Engraving Machine

Monport 150W 40" x 64" CO2 Laser Engraver Autofocus Laser Engraving Machine. MONPORT 150W CO2 Laser Engraver Cutter with 40x64 Motorized Bed, Laser Engraving and Cutting Machine, Lightburn Compatible, with Red Dot Pointer Autofocus Air Assist for Wood Acrylic More. Machine Dimension: 84.6'' x 59'' x 35'' (215cm x 150cm x 90cm). Package Dimension: 89.4" x 65.4" x 46.9 (227cm x 166cm x 119cm). Working Dimension: 40" x 64" (100cm x 160cm).

Pass-through Dimension:2.9'' x 54.9''(7.5cm x 139.5 cm). Max Cutting Speed: 30mm/s (actual speed depends on material).

Max Engraving Depth: 19.05mm. Min Engraving Depth : 0.01 mm. Net Weight: 790 lbs (360 kg). Package Weight: 808 lbs (366.5 kg).

Can safely engrave or cut any laser-compatible material. Wood, glass, acrylic, fabric, leather, paper, cardboard, rubber. If necessary, we can test it for you. This viewing window is made from special fire-resistant polyester with iron frames. The melting point of this polyester ranges from 432° to 488° and the ignition temperature of it is over 1000°, which can dramatically decrease the possibility of fire accidents caused by the heat of laser burning the materials.

Equipped with X and Y stepper motors, this rail features efficient power transmission with high precision. The enclosed rail is designed to avoid smoke and debris and prolong the service time of rail units.

Laser Protective Glasses for Free. Lasers emit radiation in the invisible form of light. This pair of laser protective glasses is certified to protect your eyes against radiation damage by looking at the class 4 laser in any way (directly, indirectly, or even looking at the laser dot on a surface can damage your eyes). Whether your chosen software is LightBurn, RDworks, AutoCAD, or CorelDRAW, this Ruida digital controller can support the given platform.

The Ruida Controller with a digital display can control the laser head, start or stop projects, adjust laser power and speed settings and so on. The Engraving Speed is up to 800 mm/s. The Cutting Speed is up to 400 mm/s. The Resolution is up to 4500 dpi. 3 LED light strips above the work bed provide illumination for precision.

2.0 Focal distance provides high resolution and etching of tiny fonts. Use the control panel to correct the focus automatically at the touch of a button - no more manual testing and adjustment. A built-in air assist system guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping engravings more precise. 3-ways to Connect with PC End. Two USB ports provide options including flash drive connectivity and a USB-to-USB PC connection.

In addition, one ethernet port is also available for connection. The red dot shows the laser head position, marks the working path and frames the project sizes, assisting you with more convenience and guidance. The safety shutdown sensor helps stopping the machine even if the window cover is on. Once closed, press the "Enter" button to continue operation.

Works on Windows XP, 2000, Vista, WIN 7, 8, 10 & 11, both 64 & 32 bit. MacOS (Version 10.11 and higher) ONLY with LightBurn software. Compatible with Lightburn, RDWorks, Coreldraw, Auto-CAD.

Supported image formats: BMP, HPGL, GIF, JPG, JPEG, DXF, DST, AI and others. Rated at over 150 watt.

Recommended engraving speed: 100 - 500mm/s. Recommended cutting speed: 1 - 30mm/s (actual speed depends on the thickness of material). Linear System- Enclosed aeronautical aluminum rails. Motion- Equipped with stepper X, Y, Z axis, plus mechanical limit switches. Cooling- Easy-to-setup water pump and hoses.

Air Assist- Built-in air assist with no external compressor required. Ventilation- On-board exhaust fan, as well as an exhaust hose so you can vent the fumes to the outdoors. Standard 110V, AC power connection. 4-pin port connection for rotary axis devices.

Recommended Operating Temperature: 60-104 °F (16C-40C). Attention: the CO2 water temperature must be maintained at 60-70°F (16-21°C). The wide 40" x 64" engraving table includes both honeycomb and aluminum knife beds to handle a wide variety of nonmetallic substrates, including wood, leather, fabric, stone, paper, and much more! The 130W laser tube can reach a peak power wattage up to 140W, allowing you to cut deeper and engrave thicker materials.

Indicator Lights & Emergency Stop. Three indicator lights keep you easily aware of your machine's operation while the emergency stop immediately cuts the laser and stops all moving parts in the event of accident. The laser automatically stops engraving, cutting, or marking when the workbed's cover is opened for your safety. Close the cover and press Start to resume your work.

The transparent acrylic window's sepia filter allows you to observe your engraver in action, as the tint blocks the laser beam and protects your eyes. The honeycomb grid has high structural stability with noise & heat reducing properties for smaller items. The aluminum knife platform is height adjustable with a strong supportive frame for larger materials like acrylic. Inner slide linear guide, high cutting precision, using linear guide, high cutting precision, accurate positioning, small jitter, smooth curve, cutting, energy speed adjustable.

Using industrial laser head, with the red dot pointer quickly indicates engraving points and marks the machine's path, ensure high precision engraving&cutting effect. Suitable for a variety of materials. Wood, glass, acrylic, fabric, leather, paper, cardboard, rubber others. A Pair of Laser Protective Glasses 1. Ethernet to Ethernet Cable 1. USB Type-A to Type-A Cable 1. USB Drive with Software (RDworks) 1. FDA Approved & CE Certified. During these days, no worry shall be concerned, so please sit back and wait for your package along the delightful sunshine and peaceful moonlight.

You may keep track of your order at will. If any question or problem is raised during transition, please let us know and we will help till the end.

All products are thoroughly inspected prior to dispatch. We accept return of 14 days of receipt, please make sure the return item must be in original shape/packing and working order. As an emerging leader in manufacturing and exporting, we specialize in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for over 10 years.

It is our mission to provide innovative products and competitive prices to satisfy you. Please submit all enquires via the "Ask a Question" tab, located at the bottom of this page.