(US)3018-pro DIY CNC Router 10W Laser GRBL Wood Engraver Milling Cutting Machine

(US)3018-pro DIY CNC Router 10W Laser GRBL Wood Engraver Milling Cutting Machine. 1 Set 3018-Pro CNC Router Engraving Machine Kit with E-Stop with XYZ limit switches. 1x GRBL 1.1f Control Board.

1x 10000mW 10W Module with cable. 1x 775 spindle motor with ER11 Collet 3.175mm. 1x 24V DC 5A Power Supply. 10 x Tip 0.1 mm 20°?

3.175 mm Engraving Bits. 1x Spindle motor harness 60cm. 3x Stepper motor harness 60cm. 1x 4G USB flash drive include the english user manual & GRBL software. Working area: 300x180x45mm (11.8" x 7.1" x 1.8).

Frame size : 420x350x270mm (16.53" x13.78" x 10.63). Spindle: 775 spindle motor (12-36V) 24V:10000r/min. Module: 10W 10000mw module 450nm. Processing thickness:4.5cm (height 6.4cm). Material: PA6 nylon & aluminum profile.

Screw rod: T8 screw rod, lead 4mm, double copper nut to eliminate backlash. Spindle Chuck: ER11 Collet (can be equipped with 0-7mm).

Step motor: Nema17 stepper motor 42x42x34mm, 1.33A, 0.3N. Power supply : 24V 5.6A power adapter (input voltage 110-240V). Support System:Windows XP / Win 7 / Win 8 / Win 10 / Win 11 and Linux. Processing accuracy:About 0.2mm. 775 spindle motor (12-36V) 24V:10000r/min.

M4 screw hole; Mounting hole pitch: about 29mm. Add E-stop & XYZ Limit switches & Offline controller. The upgraded cnc 3018 pro machine is equipped with.

Support SD card and TF card at the same time, standard capacity 1G; with this offline controller, you can directly control the CNC router without connecting it to your computer. After inserting the file into the SD card. The engraving file can be directly identified. You can also use the micro USB cable to connect the offline hand controller board to your computer and save the file directly. Manually control: manually adjust X, Y, Z axis location as engraving starting point.

Manually open or close spindle, manully open or close cooling fan. File engraving: after off-line controller save file, it can connect the GRBL control board and process engraving. No need to connect PC computer. Save file: after the off-line controller connect PC, it will be recognized as USB, large capacity storage device, can access engraving file directly.

Master chip: atmel 328P (arduino nano). Spindle drive chip: MOSFET (recommendation 24V, current : within 10).

The spindle supports 0-100% adjustable PWM power. Support stepper motor: 12V, maximum current of 2A or less is recommended within 1.5A and additional heat. Power Interface: 5.5-2.5mm DC interface. Support PWM / TTL signal control, power 0-100% adjustable. Cancel the drive module, use. Integrated imported stepper motor drive. With short circuit protection, and integrated heat dissipation aluminum alloy. Improved USB interface: the original USB interface is patch soldering, transport collision and improper use, easy to drop, now changed to plug-in, very strong. Optimized the XYZ limit port and the port connected to the device, making wiring and operation easier. After installing the limit switch, when the XYZ axis moves beyond the travel of the engraving machine, the limit switch will trigger the machine to automatically stop the movement. This function can be used when an emergency stop is required at work, making our work safer and more efficient. And move the power switch button from the bottom to the side, simple operation, more safety in the process of using the machine. Emergency stop button port, probe port and XYZ limit port.

Protect control board in transit, to avoid short circuit problem during use. Can insert offline modules and computers at the same time.

Offline will automatically identify if there is computer control. Enhanced spindle drive, can support.

The spindle drive increases the optocoupler isolation, which makes the control board generate. Less heat, and the spindle speed adjustment is more linear and safer. Materials: Aluminum alloy + plastic. Head can be rotated left and right to adjust focus, the smaller the focus, the better the effect.

The module comes with an aluminum casing and is also equipped with a cooling fan, ensuring the advantage of strong heat dissipation. Low noise, high precision, dedicated for engraving machine. Equipped with a 3-pin plug, plug and play, very convenient.

10W power, can be carved wood, bamboo, paper, ivory, leather, flammable plastic, PCB, ceramic/stone, metal surface paint, metal surface plating etc. Can not work on metal, iron, glass, 201/304 stainless steel, jewelry or silver.

Ctrl: Machine Control; File: Use the Gcode file; Press [Y+] [Y-] to select; Press[Ok] to Enter. X± Y± Z±: Moving Axis. Exit/Step: Change Step/Exit (long press).

How to increase the spindle power: After pressing the spindle button, press and hold the OK button and the Z+ button simultaneously to increase the speed. How to decrease the spindle: After pressing the spindle button, press and hold the OK button and the Z- button simultaneously to decrease the speed. Common supported formats include nc. Press [Y+] [Y-] to select file.

Press [Ok] to begin if you are ready. Note:Long press [Exit] to stop machining. Upgraded 3018 Pro Mini CNC machine. Small size, light weight, USB interface, GRBL control systems. Great cnc router machine for beginers. Very easy to install, stable structure. Main application:can be engraved. Plastic, wood, acrylic, pvc, pcb, wood and the like material. Copper and aluminum and other materials.

But can not carve hard metal, jade or other very hard texture of the items. If you change the spindle to a 10W module, also can. Be carved wood, bamboo, paper, ivory, leather, flammable plastic, PCB, ceramic/stone, metal surface paint, metal surface plating etc. Can not work on metal, iron, glass, stainless steel, jewelry or silver. What materials can the milling cutter generally engrave or cut?

Wood, acrylic (acrylic), pcb, pvb, soft metal, iron, glass, stone etc. What thickness of wood or acrylic can generally be cut by. Wood board (acrylic), speed setting 100, power setting 1000. Q: The X, Y and Z axis of the machine cannot be moved, what should I do? A: First check whether the wires are correctly connected, whether the power switch of the control board is pressed, and then check whether the coupling is off.

Q: The engraved image is reversed, what should I do? A: Enter 3=2 or RST=command. English user manual and GRBL software.

File formats supported by the software. Software used to create Gcode. Carbide Create, Artcam, MeshCam, Fusion360, Inkscape etc. Upgraded 3018 Pro Mini CNC machine small size, light weight, USB interface, GRBL control systems, great cnc router machine for beginers;3018 Pro Max cnc machine is very easy to install, stable structure. Main application:can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material. Soft metal like copper and aluminum and other materials, but can not carve hard metal, jade or other very hard texture of the items. If you change the spindle to the laser module: can be carved wood, bamboo, paper, ivory, leather, flammable plastic, PCB, ceramic/stone, metal surface paint, metal surface plating etc. Please check out your address carefully when processing order. We are not responsible for wrong or undeliverable address. Please give us the opportunityto resolve any problem when you have, we concern your problem and we will try our best to resolve it. We work hard to make sure EVERY CUSTOMER 100% satisfaction.

When you have the parcel, and not satisfied the goods or it is other problem like as broken, pls tell us the detail reason and provide the photos to us. Item must be in it's original condition and no physical damage. We are online from Monday to Saturday.