Secondhand CO2 Laser Cutter 24x40 100W Engraver Ruida Panel Software Autolift

OMTech 100W CO2 Laser Engraver Cutter Marker Etcher Engraving Cutting Machine with 24"x40" Workbed (AF2440-100). Our High-Power CO2 Laser Engravers. Known for potent laser beams with heavy-duty cutting ability and professional precision. Ranging from 100W to 150W, these laser machines can engrave deeper and cut through 10 mm to 15 mm (2/5" to 3/5") thick plywood and acrylic. HIGH LASER POWER: This laser engraving and cutting machine comes with a YL 100W CO2 laser tube to cut through thick materials and engrave your designs faster, deeper, and clearer.

RUIDA DIGITAL CONTROLLER: The intuitive control panel with a digital display allows complete control of the laser head, pausing and stopping projects, adjusting laser power and speed settings, file viewing, and project framing via Windows-compatible RDWorks v8. USB & ETHERNET PORTS: 2 USB ports allow flash drive connectivity and a USB-to-USB PC connection. Plus, the ethernet connection is compatible with PCs. LCD DISPLAY: A secondary display panel monitors the real-time electric current in milliamps and auto-judges fault, easing the troubleshooting process and reducing potential damage to the laser tube and power supply.

Plus, it's accessibly located on the left side of the machine. LINEAR RAIL GUIDING SYSTEM: Equipped with X, Y, and Z stepper motors for efficient power transmission between the guide rails with high precision and long service life. MOTORIZED AUTOFOCUS WORKBED: The autofocus pen senses the correct focus distance from the laser head to the target material and signals the Z-axis motor to automatically raise or lower the workbed to the perfect focus height. VIEWING WINDOW: A transparent acrylic glass viewing window allows observation throughout the laser engraving process.

Plus, it's equipped with a sepia tint to protect your eyes from indirect laser beam exposure. RED DOT GUIDANCE: A red dot pointer mounted on the laser head quickly indicates engraving points, marks the machine's path, and identifies positioning sizes, allowing an effortless project setup process.

ADJUSTABLE LASER NOZZLE: The laser nozzle can extend downwards up to 1.75 or be fully retracted, allowing more control over different focal distance setups. AIR ASSIST: A pre-installed air compressor guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping your workbed cleaner and engravings more precise.

TWO-WAY PASS-THROUGH: There's always extra room! Equipped with 43"W x 2.88"H front and rear pass-through doors to accommodate materials larger than the table size. BUILT-IN VENTILATION: A pre-installed vent fan expels smoke and fumes to create a safer workspace and extend the service life of your machine. WATER COOLING SYSTEM: Pre-installed hoses along with the included water pump allow for a fast and easy setup.

Only use with distilled water, ensuring it stays between 60-70°F (16-21°C). WATER FLOW SENSOR: A pressure flow sensor monitors water flow throughout the laser engraving process and prevents the laser from firing if water stops circulating through the laser tube.

AUTOMATIC SHUTDOWN: The auto-shutdown safety feature stops the machine when opening the transparent window cover. Once closed, press the "Enter" button to continue operation. EFFORTLESS CLEANUP: A debris collection system below the workbed funnels engraving debris into a removable collection tray, helping maintain your machine's cleanliness and easing the cleanup process. LaserCutting:Acrylic, Wood, Leather, Plastics, Fabrics, MDF, Cardboard, Paper, Corian, Foam, Fiberglass, Rubber.

Marking/Engraving:Acrylic, Wood, Leather, Plastics, Fabrics, Glass, Rubber, Cork, Brick, Granite, Marble, Tile, River Rock, Bone, Melamine, Phenolic, Aluminum, Stainless Steel, Titanium. Cannot cut hardwoods like mahogany. CO2 laser machines only mark bare metals when anodized or treated.

Some PVC-based acrylics can create toxic fumes when lasered. FDA, CE, ISO9001, EN ISO 11553-1 IEC 60825-1 Certification. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "acautoparts04" and is located in this country: US. This item can be shipped to United States.

• Brand: OMTech
• MPN: AF2440-100
• Engraving Method: Laser
• Type: Engraving Machine
• Material: Acrylic, Felt, Foam, Glass,Neoprene, Paper, Plastic, Rubber,Wood
• Engraving Application: Gift Personalization, Housegoods, Office Signage, Plaque, Signs
• Power: 100 W
• Machine Operation: Computerized
• Name Tag Style: Badge
• Model: SH-G1060
• Laser Power Supply: 110V/60Hz AC
• Engraving/Cutting Area: 24″ × 40″ (60×100 cm)
• Engraving/Cutting Thickness: 0–⅘″ (0–20 mm)depends on materials
• Workbench Adjustment: Electric
• Workbed Adjustable Height: 5.9 in. Engraving Speed: 23.6 in.

  Cutting Speed: 15.75 in. (40 cm/s)

• Graphic Operating Modes: Optimized Raster, Vector, and Combined
• Transfer Interface: Flash Drive, USB Cord, Ethernet Cord
• Net Weight: 573.2 lb. (260 kg)
• Machine Size: 63×48.8×39.4 in.

  (160×124×100 cm)

• Rated Power: 100W
• Laser Tube Model: Yongli H4
• Laser Wavelength: 10.60 μm
• Laser Type: Class 1
• Laser Tube Diameter: 2.36 in. (60 mm)
• Laser Tube Length: 57 in. (1450 mm)
• Focal lens Dia: 20 mm
• Focal lens FL: 2.5 in.
• Mo mirror Dia: 25mm