SCULPFUN S9 90W effect Laser Engraving Machine Cutter 410x420mm Full Metal DIY

SCULPFUN S9 90W effect Laser Engraving Machine Cutter 410x420mm Full Metal DIY. Deeper Cutting & Higher Precise Engraving?

The SCULPFUN S9 laser engraver uses the latest 5.5-6W laser beam shaping technology diode laser and ultra-thin 0.06mm sharp laser focus, which has super cutting penetration and high precision engraving. It can cut 0.59" thick wood, 0.39" acrylic and plywood. In addition, it even can carve ceramics, stainless steel and dark stone. (If you wanna carve metal and transparent glass, please blacken their surface with "acrylic paint" first)??? Fast Focusing & Practical Frame Structure? With fixed focus lens and sliding design, you only need to slide the laser head and tighten the screw by hands to complete fast focusing, which says goodbye to complex focusing adjustment by screwdriver. In addition, even the frame of laser cutter takes effects. Beside stability, the precise scale lines of X and Y-axis is convenient for you to measure the size of target objects. There is also a power switch on the machine for emergency power off. Secure Desk Protection & Eye Protection?

Please note that there is a A4 size steel pad in the packaging, which can well protect your table from laser damage. Moreover, the laser filter cover on the laser module filters 98% of the UV light, allowing you to observe the laser engraving process without wearing goggles and prevents your pet from grabing the laser spot. Easy To Assemble & Wide Compatibility? Absolutely, it is easy to assemble this S9 laser engraver, usually only takes 10-20 minutes to finish installation and setup.

Furthermore, this laser cutting machine works well with various engraving software, such as LaserGRBL, LightBurn, Benbox, GrblController, LiteFire. It supports PWM mode engraving and Windows/MACs system. (Strongly recommend LightBurn software due to its multifunction and MACs system can only use LightBurn, please know it)???

Perfect For Beginner & Holiday Gifts? On the one hand, if you are a beginner or enthusiast with a strong interest in engraving and cutting, please consider this S9 laser engraver. It has advanced performance but is cheaper. We also provide the beginner with a variety of guides (you can learn through videos and images in the link). Higher Accuracy DIY Laser Cutter and Engraver Machine.

Best Desktop High Power DIY Laser Cutter and Engraver Machine for business starters, hobbyists, designers, artists, home-makers, professionals. Better technologies industrialized steel wheel&shaft, tension wheel, synchronous belt, Compressed light spot, etc. Makes the carving more precise and the carved works perfect.

More humanized designs, you can concentrate on your creation all the time. 90w Effect Laser Beam Shaping Technology. To get a super high density energy laser beam, S9 uses the latest 5.5W laser beam shaping technology with 0.060.06mm ultra-fine laser spot, which has powerful cutting ability and precise carving ability.

S9 has an ultra-fine 0.06mm sharp laser focus, with super cutting penetration and precision, he can cut up to 15mm thick wood, 10mm acrylic, easily carve ceramics and stainless steel. Professional test pattern and film ruler show that the S9 engraving line is only 0.08mm, thinner than a hair.

This means that S9 can engrave more precise, clear, and delicate objects. Using imported chips and circuits motherboard, structure, technology has been optimized, built-in fan cooling system, the module will not heat up even after working a long time, improving the service life. S9 combines a fixed focus lens and a sliding design. You only need to slide the laser and tighten the screws to complete focusing. No tools needed, fast and easy.

The laser filter filters 98% of UV light into your eyes. You and those around you can watch laser engraving without goggles. It also prevents animals from catching the laser spot. Engraving Materials: wood, paper, cardboard, plastic, white, PCB board, aluminum oxide, black-painted metal, dark ceramic. Cutting Material: 10 mm thick wood boards, 6mm plywood & acrylic, cardboard, fabric, bamboo, plastic board. Operating Software: LaserGRBL, LightBurn, Benbox, GrblController, LiteFire. (You can view the software operation tutorial in the video). Supporting System: Windows XP, 7,8,10 system, MAC system. Supported File Formats: NC, BMP, JPG, PNG, DXF and other image formats.

Please pay attention to the following matters when using the machine. For detailed machine instructions, please refer to the manual for parameter settings. When operating the laser engraving machine, please install the laser protective cover. If it is not installed, you need to wear goggles. Please do not touch the laser emitter with your hand, or it may burn your hand.

Please avoid strong impact on the machine. Please set up laser engraver in the fireproofing area, with good ventilation. Children under 14 are not allowed to use this product and children over 14 need adult supervision.

The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser. When the laser engraver is working, the operator should not leave it alone, just in case the materials being carved catch fire.

The included steel pad protects the table from laser damage. Don't worry about the laser damaging the table, this is our unique and thoughtful service.

Convenient Scale And Safety Switch. X-axis and Y-axis are engraved with precise scale lines for quick measurement of engraved or cut objects. Equipped with a power switch to turn off the machine in case of emergency.

Normal engraving machines can only engrave smaller square areas, but the S9 can engrave longer engraving needs, such as wall mural, skateboards, fish, shrimp, etc. 1 x 12V 3A power adapter. 1× A4 size steel pad. Laser Output Power: 5.5W-6W.

Engraving Accuracy: 0.01mm; Engraving Line: 0.08mm. Laser Spot: 0.060.06mm. Laser Wave Length: 445 ± 5nm. Data Transmission Method: USB Connection. Input Voltage: 100-240V AC, 50/60HZ.

Immediately you paid for the order. Communication always is best way to solve problem.

We accept any return in 14 or 30 days that we promise. Please never return the parcel without agreement.

From us, it is no possible for us to get the parcel. Because the Ratings below 5 are equal to You are NOT satisfied. Your recognition is our motivation in developing our small company and improving our service for each customer.

It'll take you one minute only. If you're not satisfied with our goods or service, please write to us immediately so that we can help you out. Sincerely hope you do not leave us any negative or neutral feedback.

Communication is very important, we believe we can resolve all the problem with each other. We will give you the best advise. We welcome to answer any questions you have.