SCULPFUN S9 90W Effect CNC Laser Engraving Cutting Machine 410x420mm Engraver US

Features: Latest Beam Shaping Technology: S9 uses the latest 5.5W beam shaping technology diode, it has an ultra-fine 0.06mm , with cutting penetration and, can cut up to 15mm thick wood, 10mm acrylic, carve ceramics and stainless steel. Focusing Design: Combines a fixed lens and a sliding design. You only need to slide the and tighten the screws to complete the focusing. This makes it very easy to use. Solid & Easy Assembly Structure: The full-metal structure design makes the machine work stably, and improves the engraving accuracy. The assembly can be completed in 10-20 minutes.

The structural frame is very and available to upgrade. During use, Wide Compatibility: The machine is compatible with various mature engraving software, such as LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, supports PWM mode engraving, supports system, switch system (LightBurn), and engraving file format Support JPG, PNG, DXF, SVG, G-code, NC, BMP, etc. Design: The filter cover filters 98% of the ultraviolet to the eyes.

And comes with a A4 size steel pad to the table from damage. Measuring ruler: X- and Y- contain precise scale lines, which is convenient for you to measure the size of engraving objects quickly. The 410x420mm large-area engraving interval can meet your various engraving needs. Specifications: Model: SCULPFUN S9 Engraving Size: 410420mm Engraving Materials: Wood, paper, cardboard,, white, board, oxide, 304 Stainless steel, ceramic, dark stone Cutting Material: Wood, acrylic, cardboard, fabric, bamboo, board, KT board Machine Electricity : 30W (It has nothing to do with cutting or engraving performance, just electricity consumes) Diode : 5.5-6W Length 455±5nm Engraving Accuracy: 0.01mm Focusing Method: Fixed + sliding device Protective Cover: The filter cover on the protects the user's eyes and prevents animals grabing the. Operating Software: Compatible with LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, etc. Operation System: Compatible with switch system. Supported file formats NC, BMP, JPG, PNG, DXF and other formats. Data Transmission Method: USB connection : International universal standard input: AC, 50/60HZ output: 5A Machine Weight: 3.0kg/ 6.61lbs Package Weight: 4.4kg/ 9.7lbs Package Size: 59 x 34 x 12cm/23.3 x 13.3 x 4.7in Note:? For detailed machine instructions, please refer to the manual for parameter settings. When operating the engraving machine, please install the protective cover. If it is not installed, you need to wear. Please do not the emitter with your hand, or it may burn your hand. Please strong impact on the machine.

Under 14 are not allowed to use this product and over 14 need supervision. The engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the. Package List: RTOXY-S9- 1× X assembly 2× X shaft 2× Y shaft 2 x Belt 1× Control box module set 3× Support feet 1× module set 1× 1× USB cable 1× Tool Kit 1× 1× 10x10cm wood chip 3mm thickness 1× 10x10cm wood chip 10mm thickness 1× A4 size steel desktop pad.