Features: [Upgraded Laser Master 2 Pro-S2-SF] New functions such as flame detection, emergency stop, etc. As the Ortur engineer team optimized the motion algorithm based on the Ortur Laser 1.4 series firmware, increasing the maximum speed from 4000mm/min to 10000mm/min.
And Increase 24V circuit system, which can support higher current and higher power laser modules and more add-ons. [More Accurate and Powerful] OLM2-LU2-4-SF FAC laser module (electric power: 20W, optical power: 4.5-5.5W, 2nd-generation FAC design, focal spot has been compressed to 0.080.15mm) can cut 4mm plywood and 6mm pine board at one pass. It's also armed with a laser shield, and very easy to use!
[Multiple Applications] engraving: wood, bamboo, paperboard, plastic, leather, PCB, alumina, non-reflective electroplating layer and paint layer metal, art knife after blackening; Cutting: cardboard, non-woven fabric, leather, 4mm plywood, 6mm pine board, some plastic boards, etc [Protection] Laser Master 2 Pro-S2-SF provides users with more security. Active Position Protection: When the machine is displaced or tilted, it would automatically stop the laser to prevent damage caused by the laser shot out of the target. When the machine or computer from crashing during the engraving process, it would automatically stop the laser.
[Accessories System Update] With upgraded firmware, 2 new protection are supported. Flame detector + buzzer alarm: When the detector detect the flame, the buzzer alarm would sound and light alarm. Emergency Stop Button: Any emergency, you could press the emergency stop button. [Offline Control Screen] You can cut the picture into Gcode command files and insert the TF card into the offline control screen to sculpt off-line. You can also use the WIFI function of the offline control screen to replace the USB cable to connect the computer and control carving.[Convenient to Learn and use it] Many Reviewers have posted Ortur Laser Engravers' reviewing and tutorial videos on YouTube, and have achieved good views. The Ortur laser engravers are fully tested by LaserGRBL. LaserGRBL has built-in the parameters of the Ortur laser engravers, which is convenient for users to use.
Installation Process about 15min and then this new upgrade laser machine brings users a better experience! Specification: Model: Laser Master 2 Pro-S2-SF Material: Aluminum, Acrylic Product Size: 60 x 57 x 18.9 cm Product Weight: 3.5kg Motherboard: 32bit OLM-PRO-V10 Carving Area: 400mmx400mm Supported Formats: Support BMP, JPG, NC (G code), SVG (vector map) and so on Supported System: LaserGRBL: Win XP / Win 7 / Win 8 / XP / Win 10; LightBurn: Windows, MAC, Linux. Input Voltage: 110V-220V (Compatible) Laser Wavelength: 445 ± 5nm Focal Spot: About 0.150.08mm Power of Laser Engraver: 36W, 12V 3A Carving Speed: 3000mm / Min and less Package Size: 66 x 25 x 11 cm/26 x 9.8 x 4.3in Package Weight: 4.8kg/10.58lb Packing List: 1 x Laser Master 2 Pro-S2-SF Machine Kits.
This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "domecool" and is located in this country: US. This item can be shipped to United States.