Ortur Laser Master 15W Personal Laser Engraving Machine GRBL Control Faster DIY

1800W Standing Clothes Fabric Steamer Iron Steam Wrinkle Remove Garment Hanger. 1080P Full HD LED Projector 4K WiFi Android 6.0 BT Home Theater Cinema HDMI 8GB. 4CH 1080N AHD DVR 1500TVL IR-CUT Outdoor Home CCTV Video Security Camera Kit US. 18-Hook Entryway Coat Rack Hat Stand Hallway Shoe Bench&Shelves Storage Wood US. Ortur Laser Master 15W Personal Laser Engraving Machine GRBL Control Faster DIY.

Fast and Precise Engraving Ortur Laser Master is a portable laser engraving machine, which is easy to install and safe to operate. It has a built-in G-sensor. When the machine tilts, it will automatically stop laser work and protect against laser damage.

Support for GRBL open source software for operating fun. It supports dynamic control laser module, and PWM power regulation, low brightness regulation.

It also supports lasers of different powers, so that this is a great device for DIY project. Main Features - 32-bit Motherboard with STM32 chip, more powerful, faster, higher precision. Easy to adjust the speed (0-3,000mm/min) and power (S0-S1,000) for both of engraving and cutting. Active position protection, there is a G-sensor on the motherboard for active position protection. If the machine detects unauthorized movement, the laser beam will stop. Laser beam safety guard, if your computer system halted, led to that the laser engraver stop moving, the laser beam will stop. Exposure limitation, after the laser beam is turned on, but there is no movement for a long time, it will automatically stop. Weak Light Mode: the laser beam automatically stops after 100 seconds. None Weak Light Mode: based on the power level, the laser beam automatically stops within 10 to 60 seconds. LaserGRBL is the most popular carving software in the world, could import different format images, you could editing in PhotoShop, Inkscape, CAD, etc. And then connect to the laser engraver via LaserGRBL for engraving and cutting. This laser engraver supports PWM mode. Pre-assembled parts, just need 5-10 minutes to install the machine. 160 x 150 mm engraving area. Aluminum profile + acrylic materials machine body. Specifications Image format: NC, DXF, BMP, JPG, PNG Operating system: Win XP, Win 7, Win 8, Win 10 Image size: No Limit (The pixel accuracy could be adjusted freely, and the default is 300 pixels per inch, it's about 0.81 um pixel precision) Power adapter output voltage: 12V 15W carving: wood, bamboo, cardboard, plastic, leather, PCB, aluminum oxide, non-reflective electroplating and paint finish metal, blackened art knife. 15W cutting: cardboard, non-woven fabric, thin wood chips, some thin plastic sheets, etc. Please wear goggles when operating the machine. Please do not touch the laser emitter with your hand, or it may burn your hand.

Please avoid strong impact on the machine. Children under 14 are not allowed to use this product and children over 14 need adult supervision. The light engraving machine cannot be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser.

This product is not recommended for industrial cutting due to its high engraving speed. Product size (L x W x H).

38.70 x 27.20 x 13.30 cm / 15.24 x 10.71 x 5.24 inches. Package size (L x W x H). 44.00 x 26.00 x 12.00 cm / 17.32 x 10.24 x 4.72 inches. 1 x Acrylic Plate for Testing, 4 x Wooden Plates for Testing, 1 x Wrench, 6 x Cable Ties, 1 x Power Adapter, 4 x Angle Fasteners, 1 x Whiteboard Marker, 1 x Brush, 4 x M5 Nuts & Washers, 2 x M3x16 Screws and 5MM Plastic Columns. Please check your address, we are not responsible for the wrong address. We stand behind every product we sell. Your better comments will be an encouragement for us to offer the better quality and the better service in future. We shall try our best to solve your problem to your satisfaction. Sincerely welcome to our store! Your satisfaction is our goal. Thanks for your purchasing from us. 1TB, 8CH 1080P XPoE CCTV Surveillance System Human Detection 4x 2PM Night Camera. 4K HD 1080P Home Theater LED Android 6.0 Wifi Wireless Projector BT HDMI 1GB+8GB. ILIFE V5 Smart Auto Robot Vacuum Cleaner Floor Cleaning Sweeper w/IR Remote US. 3000TVL Outdoor Bullet Home CCTV Security Camera 940nm Invisible IR Night Vision.

2-Pack 99 LED Wireless Solar Flickering Dancing Flames Garden Lamp Dusk to Dawn. Metal Detector Gold Digger Deep Sensitive Light Hunter LCD Display Pinpoint HOT. LED Mini Home Theater Projector Full HD 1080P 7000 Lumen 3D Video Movie HDMI USB.

Kid's 6Cube Portable Clothes Storage Closet Organizer Shelf Wardrobe Rack Pastic. The item "Ortur Laser Master 15W Personal Laser Engraving Machine GRBL Control Faster DIY" is in sale since Wednesday, January 15, 2020. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "bestdealzones" and is located in Shenzhen. This item can be shipped worldwide.

• Brand: Ortur
• MPN: Does Not Apply
• Bundle Listing: No
• Custom Bundle: No
• Modified Item: No
• Type: Engraving Machine
• Engraving Method: Laser
• Machine Operation: Electric
• Material: Aluminum + Acrylic