OMTech Galvo Head Upgrade Replacement Galvanometer for 355 1064 & 10600nm Lasers

OMTech Galvo Head Upgrade Replacement Galvanometer for 355 1064 & 10600nm Lasers. Have you worn the motors right off your fiber laser's old galvanometer? Is it past time you upgraded your machine's standard galvo head to enjoy a tighter spot size, faster processing, and even greater accuracy? OMTech is here to ensure you have the right accessories for a perfect engraving experience!

This RC1001 3D laser scanning system is the perfect Sino-Galvo replacement or upgrade for any OMTech laser marking machine, with a 10 mm wide laser aperture and M85 thread lens housing. This compact galvanometer kit comes with the serial cable and new 15V power supply so it's ready for installation on any compatible 355, 1064, or 10600 nm laser engraver. Once installed, the high-performance rotary motors will convert the instructions from your control computer into precise movements of the X and Y mirrors to mark your text, designs, logos, serial numbers, bar codes, and more across flat surfaces in metal, stone, and hard plastic at speeds up to 157 ips.

The helpful built-in red dot locator keeps setup and positioning fast and convenient, letting you measure twice and cut once faster than ever. With its precise positioning, high resolution, and minimal drift for outstanding linearity, you can do no better. Order OMTech's galvo scanner head kit today, with our superior quality, user-friendly design, and good name ensuring you'll enjoy its use for years to come! Perfect as either a replacement or upgrade, this galvo scanner head slots onto any standard OMTech fiber laser and is compatible with other galvo lasers emitting 355 nm, 1064 nm, or 10.6 µm wavelength beams from 10 mm aperture collimators. Industry-leading photoelectric sensors control rapid adjustment of the rotary motors, positioning the X and Y axis mirrors above.

Engrave your text, logos, designs, bar codes, and more across flat metal, stone, or hard plastic surfaces with pinpoint precision. Responding to input from your control computer and the photoelectric sensors, our galvanometric scanning head positions itself at 236 ips, sets in under 0.4 milliseconds, and then marks and engraves at speeds up to 157 ips (4000 mm/s) with high resolution, minimal drift, and outstanding linearity. The galvo head's built-in red dot indicator produces a clearly visible locator, allowing you to quickly and easily position your material and focus your design before each run; electrical fail-safes include protection against overload, overcurrent, and reversed polarity, ensuring lastingly stable performance. Marking Speed: 157 ips (4000 mm/s).

Positioning Speed: 236 ips (6000 mm/s). Setting Time: 0.4 msec. Continuous Use: 0.5 mrad. Scale Drift: 22 ppm/°F (40 ppm/°C).

Zero Drift: 8 µrad/°F (15 µrad/°C). K9 Glass: 9.1 J/cm². Position Signal Impedance: 10kO (±1%). Position Signal Input Scaling Factor: 0.33 V/deg.

Laser Wavelengths: 355 nm / 1064 nm / 10.6 µm. Laser Input Aperture: 0.4 in. Central Distance between Mirrors: 0.5 in. Driver Board Dimensions: 3x1.8x1 in.

Galvo Head Dimensions: 3.9x 3.7x4.7 in. DB25 Cable Length: 9'2 (2.8 m). Net Weight: 1.9 lb.

1 x RC1001 Galvo Head. 1 x DB25 Serial Cable. 1 x 15V Power Supply. Master, AmericanExpress, Discover, Google Pay.

Distance UNLESS the closer warehouse is out of stock for the specific products that customers have ordered. Your kind consideration is highly appreciated. If your item has been damaged in transit or. Please check everything carefully after you receive the parcel, as any.

Damages except DOA (Dead-On-Arrival) are not covered if it's the fault of the consumer. Our 30-day Satisfaction Guarantee assures our customers that they will receive all orders promptly and exactly as described. Parts must be resaleable and in the original packaging.

We cannot take back used products. We cannot take back installed or tired products. We do reserve the right to refuse and return any parts we find have been installed, are used or do not meet the above criteria. Return request need to be within 30 days of receipt. Feedback as much as you do.

If for some reason there is. As an emerging leader in manufacturing and exporting, we specialize in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for over 10 years.

It is our mission to provide innovative products and competitive prices to satisfy you. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving".

The seller is "acautoparts04" and is located in this country: US. This item can be shipped to United States.

Brand: OMTech
MPN: FMMHC10
Engraving Method: Laser
Marking Speed: 157 ips (4000 mm/s)
Positioning Speed: 236 ips (6000 mm/s)
Max. Setting Time: 0.4 msec.
Repositioning Drift: 8 μrad
Max. Continuous Use): 0.5 mrad
Max. Gain Error: 8 mrad
Max. Scale Drift: 22 ppm/°F (40 ppm/°C)
Max. Zero Drift: 8 μrad/°F (15 μrad/°C)
Max.
K9 Glass: 9.1 J/cm²
Silicone Film: 10 J/cm²
Input Voltage: ±15V DC
Average Current: 2A
Peak Current: 15A
Digital Signal Interface: XY2-100
Position Signal Impedance: 10kΩ (±1%)
Position Signal Input Scaling Factor: 0.33 V/deg
Laser Wavelengths: 355 nm / 1064 nm / 10.6 μm
Operating Temperature: 32–113°F (0–45°C)
Storage Temperature: 14–140°F (-10–60°C)
Laser Input Aperture: 0.4 in. (10 mm)
Central Distance between Mirrors: 0.5 in. (13.5 mm)
Scan Angle: ±15°
Driver Board Dimensions: 3x1.8x1 in. (75x46x25 mm)
Galvo Head Dimensions: 3.9x 3.7x4.7 in.
(100x95x120 mm)
Compatible Lens Size: M85
DB25 Cable Length: 9'2\
Net Weight: 1.9 lb. (850 g)
UPC: 797434269973