OMTech CO2 150W 63"x40" Laser Cutter Engraver Yongli A6S Autofocus Water Chiller. OMTech 150W CO2 Laser Engraver Cutter Marker Etcher Engraving Cutting Machine with 40"x63" Workbed (AF4063-150E). Our High-Power CO2 Laser Engravers. Known for potent laser beams with heavy-duty cutting ability and professional precision.
Ranging from 100W to 150W, these laser machines can engrave deeper and cut through 10 mm to 15 mm (2/5" to 3/5") thick plywood and acrylic. Four-way pass-through doors allow the workbed to handle materials larger than the bed itself from any direction. This engraver includes 2 workbeds. One honeycomb and one aluminum blade. This powerful laser engraver comes with an industrial-strength CW-5200 water chiller to keep the laser tube nice and cool no matter your project.Use the control panel to correct the focus automatically at the touch of a button. No more manual testing and adjustment! One USB port reads flash drives while the other connects directly to your PC via dedicated cable.
The Ethernet port allows you to work remotely online. An air compressor mounted on the laser head blows away all smoke, dust, and sparks to protect your laser lens and extend its service life.
It comes pre-installed, so it's ready to go as soon as you open the box. 160 cm workbed gives you plenty of space even before you open the integrated pass-through doors that permit you to work on even larger materials including wood, rubber, plastic, paper, fabric, leather, ceramics, tile, fiberglass, marble, stone, and more! The Air Assist ventilation function directs hazardous debris away from the engraving surface and into the waste collection bin, which takes only seconds to empty manually. Internal & External Vent Pipes. Alongside the usual external vent, a retractable pipe inside the machine.
Connecting to the waste hopper below the engraving table. Improves ventilation efficiency and extends the service life of your reflective lenses. Digital Display for Easy Operation.NEW UPGRADE for 2020 - Digitally displayed laser power allows you to keep an eye on your machine's function throughout the engraving process. Quickly troubleshoot any power supply problems by monitoring the LCD display. The transparent acrylic window's sepia filter allows you to observe your engraver in action, as the tint blocks the laser beam and protects your eyes. The laser automatically stops engraving, cutting, or marking when the workbed's cover is opened for your safety. Close the cover and press Start to resume your work. Indicator Lights & Emergency Stop.
Three indicator lights keep you easily aware of your machine's operation while the emergency stop immediately cuts the laser and stops all moving parts to minimize accidents. The industrial-grade laser head delivers a stable laser beam over the long service life of the machine, while the red-dot locator helps to quickly indicate engraving points and marks the engraving path, allowing effortless setup and operation. The integrated exhaust system cools and ventilates the unit, removing potentially hazardous smoke and gases.LaserCutting:Acrylic, Wood, Leather, Plastics, Fabrics, MDF, Cardboard, Paper, Corian, Foam, Fiberglass, Rubber. Marking/Engraving:Acrylic, Wood , Leather, Plastics, Fabrics, Glass, Rubber, Cork, Brick, Granite, Marble, Tile, River Rock, Bone, Melamine, Phenolic, Aluminum, Stainless Steel, Titanium. Cannot cut hardwoods like mahogany. CO2 laser machines only mark bare metals when anodized or treated. Some PVC-based acrylics can create toxic fumes when lasered. FDA , CE , ISO9001, EN ISO 11553-1 IEC 60825-1 Certification. If you must modify your. Laser tube and power supply. Special circumstances will be stated clearly in the listing.
If your item has been damaged in transit or. Please check everything carefully after you receive the parcel, as any.Damages except DOA (Dead-On-Arrival) are not covered if it's the fault of the consumer. As an emerging leader in manufacturing and exporting, we specialize in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for over 10 years. It is our mission to provide innovative products and competitive prices to satisfy you.
Please submit all enquires via the Ask a Question tab, located at the bottom of this page. The item "OMTech CO2 150W 63x40 Laser Cutter Engraver Yongli A6S Autofocus Water Chiller" is in sale since Monday, April 27, 2020.This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "freeshipping2you" and is located in Ontario, California. This item can be shipped to United States.