OMTech 80W 20x28 CO2 Laser Engraver Engraving Machine w. CW-3000 Water Chiller

OMTech 80W 20"x28" CO2 Laser Engraver Engraving Machine w. OMTech 80W CO2 Laser Engraver Cutter Marker Etcher Engraving Cutting Machine with 20"x28" Workbed (AF2028-80).

Our Mid-Range CO2 Laser Engravers - known for efficient engraving speeds and considerable cutting capabilities. Ranging from 50W to 80W, these laser engraving machines engrave effectively and cut through 6 mm to 9 mm. 35 thick plywood and acrylic.

Start your laser engraving journey with a Mid-Range laser engraver by OMTech! RUIDA DIGITAL CONTROLLER: The intuitive 6442 Ruida control panel with RDWorks V8 features advanced functions to realize your most sophisticated designs perfectly. Plus, its convenient LCD screen provides complete control over the laser marking process. USB & ETHERNET PORTS: 2 USB ports allow flash drive connectivity and a USB-to-USB PC connection. Plus, the ethernet connection is compatible with PCs.

MOTORIZED AUTOFOCUS WORKBED: The autofocus pen senses the correct focus distance from the laser head to the target material and signals the Z-axis motor to automatically raise or lower the workbed to the perfect focus height. LINEAR RAIL GUIDING SYSTEM: Equipped with X and Y stepper motors for efficient power transmission between the guide rails with high precision and long service life. VIEWING WINDOW: A transparent acrylic glass viewing window allows observation throughout the laser engraving process. Plus, it's equipped with a sepia tint to protect your eyes from indirect laser beam exposure.

RED DOT GUIDANCE: A red dot pointer mounted on the laser head quickly indicates engraving points, marks the machine's path, and identifies positioning sizes, allowing an effortless project setup process. ADJUSTABLE LASER NOZZLE: The laser nozzle can extend downwards up to 1.75 or be fully retracted, allowing more control over different focal distance setups.

AIR ASSIST: A pre-installed air compressor guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping your workbed cleaner and engravings more precise. Equipped with 29"W x 3.75"H front and rear and 19.69. H left and right pass-through doors to accommodate materials larger than the table size.

BUILT-IN VENTILATION: A pre-installed vent fan expels smoke and fumes to create a safer workspace and extend the service life of your machine. WATER COOLING SYSTEM: Pre-installed hoses along with the included water pump allow for a fast and easy setup. Only use with distilled water, ensuring it stays between 60-70°F (16-21°C).

WATER FLOW SENSOR: A pressure flow sensor monitors water flow throughout the laser engraving process and prevents the laser from firing if water stops circulating through the laser tube. AUTOMATIC SHUTDOWN: The auto-shutdown safety feature stops the machine when opening the transparent window cover. Once closed, press the "Enter" button to continue operation. LaserCutting:Acrylic, Wood, Leather, Plastics, Fabrics, MDF, Cardboard, Paper, Corian, Foam, Fiberglass, Rubber. Marking/Engraving:Acrylic, Wood, Leather, Plastics, Fabrics, Glass, Rubber, Cork, Brick, Granite, Marble, Tile, River Rock, Bone, Melamine, Phenolic, Aluminum, Stainless Steel, Titanium.

Cannot cut hardwoods like mahogany. CO2 laser machines only mark bare metals when anodized or treated. Some PVC-based acrylics can create toxic fumes when lasered. FDA, CE, ISO9001, EN ISO 11553-1 IEC 60825-1 Certification.

If you must modify your. Laser tube and power supply. Special circumstances will be stated clearly in the listing. If your item has been damaged in transit or. Please check everything carefully after you receive the parcel, as any.

Damages except DOA (Dead-On-Arrival) are not covered if it's the fault of the consumer. As an emerging leader in manufacturing and exporting, we specialize in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for over 10 years. It is our mission to provide innovative products and competitive prices to satisfy you. Please submit all enquires via the "Ask a Question" tab, located at the bottom of this page. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "orionmotortech" and is located in this country: US.

This item can be shipped to United States.

Brand: OMTech
MPN: AF2028-80
Engraving Method: Laser
Type: Engraving Machine
Material: Acrylic, Felt, Foam, Glass,Neoprene, Paper, Plastic, Rubber,Wood
Engraving Application: Gift Personalization, Housegoods, Office Signage, Plaque, Signs
Power: 80 W
Machine Operation: Computerized
Name Tag Style: Badge
Model: SH-G570
Power Supply: 110V/60Hz AC
Engraving/Cutting Area: 28 × 20 in. Engraving/Cutting Depth: 0.6 in.
(15 mm)
Workbed Adjustment: Electric
Workbed Height Range: 0.9 in. Engraving Speed: 19.6 ips (500 mm/s)
Max. Cutting Speed: 15.7 ips (400 mm/s)
Transfer Interface: Flash Drive, USB Cable, Ethernet Cable
Min. Letter Size: 0.04 × 0.04 in.
(1×1 mm)
Cooling System: Water & Air
Machine Dimensions: 47.2 × 34.2 × 36.6 in. (120×87×93 cm)
Net Weight: 331 lb.

(150 kg)
Rated Power: 80W
Laser Tube Model: EFR F2
Laser Wavelength: 10600 nm
Laser Type: Class 1
Laser Tube Diameter: 3.15 in. (8 cm)
Laser Tube Length: 49.2 in.
Service Life (MTTF) at <40% / 40–70% / >70% Power: 8000/6500/4000 hr.
Warranty: 1 Year
Focal lens Dia: 20 mm
Focal lens FL: 2.5 in.
Mo mirror Dia: 25mm
UPC: 797434221643