OMTech 130W 35x55 in CO2 Laser Engraver Cutter Marker with Premium Accessories B

OMTech 130W 35x55 in CO2 Laser Engraver Cutter Marker with Premium Accessories B
OMTech 130W 35x55 in CO2 Laser Engraver Cutter Marker with Premium Accessories B
OMTech 130W 35x55 in CO2 Laser Engraver Cutter Marker with Premium Accessories B
OMTech 130W 35x55 in CO2 Laser Engraver Cutter Marker with Premium Accessories B
OMTech 130W 35x55 in CO2 Laser Engraver Cutter Marker with Premium Accessories B
OMTech 130W 35x55 in CO2 Laser Engraver Cutter Marker with Premium Accessories B
OMTech 130W 35x55 in CO2 Laser Engraver Cutter Marker with Premium Accessories B
OMTech 130W 35x55 in CO2 Laser Engraver Cutter Marker with Premium Accessories B
OMTech 130W 35x55 in CO2 Laser Engraver Cutter Marker with Premium Accessories B
OMTech 130W 35x55 in CO2 Laser Engraver Cutter Marker with Premium Accessories B
OMTech 130W 35x55 in CO2 Laser Engraver Cutter Marker with Premium Accessories B
OMTech 130W 35x55 in CO2 Laser Engraver Cutter Marker with Premium Accessories B

OMTech 130W 35x55 in CO2 Laser Engraver Cutter Marker with Premium Accessories B

OMTech 130W 35x55 in CO2 Laser Engraver Cutter Marker with Premium Accessories B. Bring your ideas to life with OMTech's laser engraver AF series! This 130W CO2 laser cutter continues to uphold our high standards with its Ruida control panel, bundled RDWorks 8, CorelLase, long-lasting Yongli laser tube, digital laser power supply, large 35x55 inch working area, and 58.9x1.8 front and back & 38.1x0.7 side pass-through doors that allow even larger pieces to be worked on. This laser cutting and engraving machine provides dual work platforms: a honeycomb bed for smaller objects and a firmer aluminum knife blade bed for larger, harder substrates like acrylic blocks.

Its autofocusing system works with the bed's motorized lifting platform to get you marking, engraving, and cutting your designs onto and into wood, paper and cardboard, plastics and acrylic, leather, fabric, and other nonmetallic materials more quickly and efficiently than ever before. Compatible with most third-party graphic software, this laser etching machine lets you upload your designs using the included software or via the Ethernet or USB ports. Choose your substrate, adjust your parameters, and the laser will engrave and cut your design with pinpoint precision.

Adjust the workbed up or down from the control panel and the provided sensors will let you automatically adjust the laser beam to compensate. To keep your creation of intricate patterns and stunning images easy, this engraver also comes with LightBurn software, offering greater compatibility with Windows, MacOS, and Linux systems. Safe as can be, this laser engraver and cutter can lock its control panel via password and the included keys; automatically cuts off the laser beam if the protective cover is opened; and provides an installed air assist to blow debris clear of the laser as it is created.

The bundled industrial-grade water chiller effectively removes heat from your CO2 laser tube, keeping your machine nice and cool during use. With OMTech's precision engineering, quality materials & assembly, and good name, you can do no better for all your marking, engraving, and cutting projects at home or in your workshop. To go along with your laser machine! The RUIDA Motherboard and intuitive RD Control System is easy to use and offers advanced capabilities. Compatible with third party software like LightBurn and AutoCAD.

Front & back and 38?? On either side-allows you to feed material into the workbed from any direction, letting you cut materials larger than the bed size by sliding them across the engraving table. The laser head is equipped with an automatic focus adjustment that you can use directly from the control panel, eliminating tedious manual adjustment.

Powerful YL H6 Laser Tube. Laser tube provides 130W of power for up to 8000 hours or up to 12000 hours of operation when consistently used at lower settings.

The Air Assist ventilation function directs hazardous debris away from the engraving surface and into the waste collection bin, which takes only seconds to empty manually. (900×1400 mm) workbed gives you plenty of space to work on wood, rubber, plastic, paper, fabric, leather, ceramics, tile, fiberglass, marble, stone, and more-even before you open the integrated pass-through doors that permit you to work on even larger pieces! One USB port reads flash drives while the other connects directly to your PC via dedicated cable.

The Ethernet port allows you to work remotely online. Equipped with X and Y stepper motors for efficient power transmission between the guide rails with high precision and long service life. A red dot pointer mounted on the laser head quickly indicates engraving points, marks the machine's path, and identifies positioning sizes, allowing an effortless project setup process. The laser nozzle can extend downwards up to 1.75 or be fully retracted, allowing more control over different focal distance setups.

A pre-installed air compressor guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping your workbed cleaner and engravings more precise. A pre-installed vent fan expels smoke and fumes to create a safer workspace and extend the service life of your machine. Pre-installed hoses along with the included water pump allow for a fast and easy setup. Only use with distilled water, ensuring it stays between 60-70°F (16-21°C).

A pressure flow sensor monitors water flow throughout the laser engraving process and prevents the laser from firing if water stops circulating through the laser tube. The crystal-clear LCD displays on the surface of the machine monitor the electric current, easily adjusted by nearby knobs, visualizing the working current and power. The transparent acrylic window's sepia filter allows you to observe your engraver in action, as the tint blocks the laser beam and protects your eyes. The laser automatically stops engraving, cutting, or marking when the workbed's cover is opened for your safety.

Close the cover and press Start to resume your work. Indicator Lights & Emergency Stop. Three indicator lights keep you easily aware of your machine's operation while the emergency stop immediately cuts the laser and stops all moving parts in the event of accident. Use LightBurn's complete set of artistic tools to create intricate patterns and stunning images that are easy to upload to your laser engraver. This rotary axis can easily work with your laser engraver to let you perform 360° engravings on cylindrical and round objects up to 3?

In diameter, such as cups, bottles, tubes, pipes, bowls, and more! This powerful laser engraver comes with an industrial-strength water chiller to keep the laser tube nice and cool no matter your project. Engraving Depth: 0.5 in.

Workbed Height Range: 5.9 in. Front/Back Pass Size: 58.94×1.89 in.

Side/Side Pass Size: 38.19×0.79 in. Engraving Speed: 23.6 ips (600 mm/s).

Cutting Speed: 15.7 ips (400 mm/s). Included Software: RDWorks 8, CorelLaser. Graphic Operating Modes: Optimized Raster, Vector, and Combined. Transfer Interface: Flash Drive, USB Cord, Ethernet Cord. Machine Dimensions: 78.7×60.6×39.4 in. Laser Tube Model: Yongli H6. Laser Wavelength: 10.6 µm. Laser Tube Diameter: 2.8 in. Laser Tube Length: 65 in.

Focal Lens Diameter: 20 mm. 1 x Laser Engraver Machine. 1 x USB Type-A to Type-A Cable. 1 x Ethernet to Ethernet Cable. 1 x Tube of Silicone Insulation.

1 x Roll of Double-Sided Tape. 1 x Venting Exhaust Duct 4 ft. 1 x 4G USB Drive with Software. 130W CO2 laser tube with an estimated lifetime of up to 12,000 operation hours depending on power setting usage and water cooling performance. PLEASE NOTE: Frequent use of high laser power settings will shorten the laser tube lifetime as follows.

Low Power 10-40% = 11,000-12,000 Hours. Moderate Power 40-70% = 9,000-10,000 Hours. High Power 70-100% = 6,000-7,000 Hours. Laser Cutting: Acrylic Wood Leather Plastics Fabrics MDF Cardboard Paper Corian Foam Fiberglass Rubber. Marking/Engraving: Acrylic Wood Leather Plastics Fabrics Glass Rubber Cork Brick Granite Marble Tile River Rock Bone Melamine Phenolic Aluminum Stainless Steel Titanium.

Cannot cut hardwoods like mahogany. CO2 lasers only mark bare metals when anodized or treated. Some PVC-based acrylics can create toxic fumes when lasered.

Master, AmericanExpress, Discover, Google Pay. If you must modify your. Laser tube and power supply. Special circumstances will be stated clearly in the listing.

If your item has been damaged in transit or. Please check everything carefully after you receive the parcel, as any.

Damages except DOA (Dead-On-Arrival) are not covered if it's the fault of the consumer. Our 30-day Satisfaction Guarantee assures our customers that they will receive all orders promptly and exactly as described.

Parts must be resaleable and in the original packaging. We cannot take back used products. We cannot take back installed or tired products. We do reserve the right to refuse and return any parts we find have been installed, are used or do not meet the above criteria. Return request need to be within 30 days of receipt. Feedback as much as you do. If for some reason there is. As an emerging leader in manufacturing and exporting, we specialize in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for over 10 years. It is our mission to provide innovative products and competitive prices to satisfy you.

Please submit all enquires via the "Ask a Question" tab, located at the bottom of this page. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "orionmotortech" and is located in this country: US. This item can be shipped to United States.


OMTech 130W 35x55 in CO2 Laser Engraver Cutter Marker with Premium Accessories B


Home   Sitemap   Contact   Privacy Policy   Terms of Use