10W Output Power 0.08 0.06mm Compressed Spot Engraving Cutting Machine, Eye Protection Fixed-Focus, Support Air Assist Kits, DIY Machine for Engraving and Cutting. Dual Compression Spot Technology: ATOMSTACK S10 Pro laser engraver with 50W machine power and 10W laser output power, ultra-fine laser focus area is reduced to 0.080.06mm, high-density laser can cut 1520mm thick wood, engrave mirror, stainless steel metal, ceramics, glass, cutting speed is 40% higher than the ordinary model. Support Offline Engraving: S10 PRO laser engraving machine configures the terminal control panel, supports offline engraving and with emergency stop button, after you install the software and upload the file, you can carry out engraving work anytime and anywhere without being restricted by the computer. High-Performance Fixed-Focus Laser: No need to adjust the focus before engraving; The focal spot area of the new laser is only 1/3 of the spot area of other ordinary lasers, Automatic fixed focus, new laser combine precision engraving and high energy cutting at the same time. New Filter Panoramic Glass Eye Protection Design: S10 laser engraving with newest panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light, you do not need to wear goggles and could watch the engraving clear.Reduce the cost of your goggles and more convenience. Compatible With: Newest ATOMSTACK S10 Pro engraving machine compatible with various mature engraving software, such as LaserGRBL(Free), LightBurn(may need paid), support Win XP / Win 7 / Win 8 / XP / Win 10 / Win 11, and support MAc system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc. ATOMSTACK S10 Pro LASER ENGRAVER. Engraving can be done without connecting to a computer.
Engraving groups can be built and multiple machines can work at the same time increase work efficiency. Light Combining Technology with Double Compression Spots. Innovative technology combines two 5W laser into one, make the laser power larger and more stable.The double compressed spot increases the power while maintaining a fine laser beam. A real 10W laser can easily cut through 1520mm thick wood and 15mm acrylic materials, engrave large areas of metal and wood. Limit switches are installed on both X-axis and Y-axis. When the engraving machine stroke is at its maximum the limit switch will be automatically triggered to protect the laser and avoid collision. The newly upgraded laser module makes the engraving clearer, cutting more neatly, and brings you a brand-new experience. Double-compressed spot technology makes the laser spot down to 0.06mm to achieve finer image engraving. Item Model Number: ATOMSTACK S10 PRO. Fixed focus laser, no need to focus. Protect the user's eyes and prevent pets from grabbing the laser spot. LaserGRBL, LightBurn(paid), support Win XP / Win 7 / Win 8 / XP / Win 10 / Win 11 system, Mac OS and Linux.
NC, BMP, JPG, PNG, DXF, etc. Cardboard, non-woven fabric, wood board, acrylic, some thin plastic board, sponge.Wood, bamboo, cardboard, plastic, leather, PCB board, aluminum oxide, non-reflective Electroplating layer and paint surface layer metal, 304 mirror stainless steel, glass, ceramics, cotton cloth, slate. How to choose an engraving machine? Question: 20w/40w/50w/60w/90w is the higher the better of number? Answer: In fact, 20w/40w/50w/60w/90w is only the output power of the machine, not the key to determining the engraving/cutting effect. The output power of the laser module is the key point. If the output power of an engraving machine is 90W, and the output power of the laser module is 55.5w, That's effect is not much different from that of a machine with a 40W output power and 55.5w laser module output power. The laser modules 5W is suitable for people who do DIY and a few cutting workers at home. 10W is a more professional machine for engraving and cutting, suitable for engraving/cutting enthusiasts and people who often need to use an engraving machine. Screen blank cause the emergency stop button is pressed, turn the emergency stop button clockwise to start the screen, and it can use all functions directly without connecting to WiFi. When operating the laser engraving machine, please install the laser protective cover. If it is not installed, you need to wear goggles. Please do not touch the laser emitter with your hand, or it may burn your hand. Please avoid strong impact on the machine. Children under 14 are not allowed to use this product and children over 14 need parent supervision. The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "fitgenics" and is located in this country: US. This item can be shipped to United States.