NEJE Plus 30W CNC Laser Engraving cutting milling Machine engraver cutter DIY
30W CNC Laser Module head FOR Laser engraving cutting machine & tranfer board. 30W/40W CNC Laser Module head fits Laser engraver cutting machine Cutter printer. 3.5w/7w/20w Laser Module Engraving head for laser Cutting Engraving Machine sale. Optical Focusing Lens fits NEJE MASTER 20W/7W/3.5W laser engraving machine head.
NEJE MASTER 2 3500MW CNC Laser Engraver Marking Engraving Machine logo DIY sale. NEJE single test board TTL PWM tester for laser head laser moduleneje-sale.
NEJE Plus 30W CNC Laser Engraving cutting milling Machine engraver cutter DIY. Just fit on a desktop with a width of 600mm, and the left side of the machine is not limited by the size of the material. It is suitable for processing large area materials. Under the protection of the MEMS vibration protection sensor, the engraving and cutting processes can be completed at the same time.
The X-axis motion module is only 120g and is driven by a 40mm thick high-performance stepper motor, bringing a faster engraving experience than the gantry structure, 3400 x 5600 pixels, engraving accuracy: 0.075 mm dot pitch, 339 dots/inch. The whole machine function test requires only 4 screws to complete the installation.
The newly designed N40630 module can cleanly cut 3mm thick plywood in one pass, with a minimum focus point of 0.05x0.05mm, and can engrave metal by covering the layer. Built-in fast intelligent drive, temperature feedback can be timely, and intelligently adjust fan heat dissipation.
Safe and quiet to use. Wood, MDF, leather, paper, cotton, etc. The cutting edges are very clean. Cover spraying can engrave stainless steel, glass, transparent acrylic and so on. Heatsink Material:Aircraft Aluminum + Brass Shell.
Section Size:40mm x 40mm. Cooling Mode:Temperature sensor intelligent control + 10000 rpm 40mm cooling fan. Adapter Plug:5.5 2.1 port.
Can Not Engrave:Metal/Glass/Stone/Ceramics/PCB/Stainless Steel/Reflective Material/ Transparent Material. Optical power output:5.5W (5500mW).
TTL&PWM Modulation:YES, Compatible with Both TTL & PWM Modulation. Input Interface:PH2.0-4Pin (+, -, PWM/TTL, Temperature), 3Pin (+, -, PWM/TTL), 2Pin+2Pin (+, -) + (PWM/TTL, -). NOTE:Temperature interface can be disconnected, NEJE provides text instructions for temperature acquisition on wiki. Module weight:202g (The lighter the weight, the smaller the move inertia, the better the performance). Life Time:10000-20,000 hours.
Please wear laser goggles during usage and avoid touching the laser directly with your eyes and skin! Do not engrave mirror objects, Pay attention to fire, Pay attention to pets when working! Smoke will be generated when burned, please pay attention to smoke exhaust indoors. If you have any quality problem, please feel free to ask our customer service for a help. If your laser module has any problem, please DO NOT dismantle it without our permission. It will destroy the laser module. Many operative problem can be solved according to your video and problem description. 1 x Plus Engraving Machine. 1 x 30W Engraving Module. 1 x 12V3A Power Supply. (Including Data cable 1, wooden board 1, paper 5, pen 1, brush 1, focusing film 1, angle iron 4, aluminum oxide film 1, cable tie 3, nut 5, large hexagon wrench 1, small hexagon wrench 1, Open wrench 1). We will reply you ASAP. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "neje-sale" and is located in this country: CN. This item can be shipped to United States, Canada, Mexico, Australia.- Brand: Neje
- Engraving Application: ID/Name Tag
- Engraving Method: Laser
- Machine Operation: Computer Numerical Control (CNC)
- Material: Acrylic&Aluminum
- Model: master 2s plus 30W
- Name Tag Style: Badge
- Power: 5.5W
- Type: Engraving Machine