NAIZEA 80W Laser Engraver 24x35 Lightburn Engraving Machine, Autolift Autofocus

NAIZEA 80W Laser Engraver 24x35 Lightburn Engraving Machine, Autolift Autofocus
NAIZEA 80W Laser Engraver 24x35 Lightburn Engraving Machine, Autolift Autofocus
NAIZEA 80W Laser Engraver 24x35 Lightburn Engraving Machine, Autolift Autofocus
NAIZEA 80W Laser Engraver 24x35 Lightburn Engraving Machine, Autolift Autofocus
NAIZEA 80W Laser Engraver 24x35 Lightburn Engraving Machine, Autolift Autofocus
NAIZEA 80W Laser Engraver 24x35 Lightburn Engraving Machine, Autolift Autofocus
NAIZEA 80W Laser Engraver 24x35 Lightburn Engraving Machine, Autolift Autofocus
NAIZEA 80W Laser Engraver 24x35 Lightburn Engraving Machine, Autolift Autofocus
NAIZEA 80W Laser Engraver 24x35 Lightburn Engraving Machine, Autolift Autofocus
NAIZEA 80W Laser Engraver 24x35 Lightburn Engraving Machine, Autolift Autofocus
NAIZEA 80W Laser Engraver 24x35 Lightburn Engraving Machine, Autolift Autofocus
NAIZEA 80W Laser Engraver 24x35 Lightburn Engraving Machine, Autolift Autofocus

NAIZEA 80W Laser Engraver 24x35 Lightburn Engraving Machine, Autolift Autofocus
NAIZEA 80W Laser Engraver 24×35 Lightburn Engraving Machine, Autolift Autofocus. This laser engraving cutting machine with Autolift & Autofocus features a high power of 80W, compatible with high-performance CO2 tube, it can engrave thicker wood board, paper, cardboard, plastic, leather and the other non-metal material faster and deeper.

It has both honeycomb and blade engraving platforms, so that the machine can better engrave harder and softer objects (the blade platform suits hard objects/ honeycomb platform suits soft objects). You can control the lifting and switching of the platform with one button, thus achieving labor-saving and improving the engraving efficiency of the machine. This laser cutter provides you with a wider workbed of 24 × 35 inches, and the 4 pass-through doors design makes the laser cutter can accommodate super larger items need to be engraved. The transparent machine cover help you to monitor the engraving progess at any time, when an emergency occurs, press the emergency button or open the machine cover both can automatically cut off the p ower supply. 80W CO2 laser engraver adopts upgrade 6442 RUIDA system, RDworks & CorelLaser software are included (also compatible with third party software Lightburn & AutoCAD, NOT INCLUDE), features 24 × 35 inches large size workbeds, high performance 80W laser tube, 4 pass-through doors, honeycomb & aluminum blade dual platforms, auto lift by pressing a button, make it a laser engraver of great functionality.

The autofocus pen senses the correct focus distance from the laser head to the target material and signals the Z-axis motor to automatically raise or lower the workbed to the perfect focus height. A red dot pointer mounted on the laser head quickly indicates engraving points, marks the machine's path, and identifies positioning sizes, allowing an effortless project setup process.

After the upgrade, the more sophisticated 6442 system can perform autofocus and complete more complex engraving graphics. At the same time, it also has password & key protection to prevent unauthorized use. These features greatly improve the safety performance of the machine.

RDworks & CorelLaser are inluded in the package (Compatible with third party software Lightburn & AutoCAD, NOT INCLUDE). A transparent acrylic glass viewing window allows observation throughout the laser engraving process.

Plus, it's equipped with a sepia tint to protect your eyes from indirect laser beam exposure. A pre-installed vent fan expels smoke and fumes to create a safer workspace and extend the service life of your machine. Pre-installed hoses along with the included water pump allow for a fast and easy setup.

Only use with distilled water, ensuring it stays between 60-70°F (16-21°C). 4 Pass-Through Doors:4 pass-through doors make the machine can hold the engraving material lager than the machine itself from any direction.

Power Source:Quality power source can provide the laser tube with continuous power, this it will provide the laser engraver with longer service life. Powerful 80W Laser Tube:The included compatible 80w laser tube can cut deeper and engrave thicker material and can reach a peak power wattage up to 100W, it has a service life of up to 8000 hours, thus they will help you complete lots of designs in the future. 4 Universal Wheels:The bottom four wheels make you move the machine become easier. Biuld-in Exhaust Fan:The upgraded ventilation system includes a new exhaust fan, it enables the machine to have better ventilation, can blow away the dust generated during its work, and avoid affecting the engraving process of the machine. Secondly, it can reduce the working temperature of the machine and improve the stability of engraving.

Laser engraver with LCD digital display makes you easily monitor the laser tube temperature and adjust the machine's power suits the thickness of the engrave item. There also include a Emergency Shutdown Button can immediately cut-down the power when urgency happen.

4 pass-through doors make the machine can hold the engraving material lager than the machine itself from any direction. High 100W power source can provide the laser tube with continuous power, you can change the laser tube up to 100W if you need, the machine also can work well, and also it will provide the laser engraver with longer service life. The cover of this machine is transparent.

You can monitor the engraving progress of the project at any time. Once an emergency occurs, the laser working can be cut off immediately by the emergency button or by opening the cover. In addition, the transparent part of the cover has an eye protection coating. Protect your eyesight to a great extent. Honeycomb and Blade Operate Platforms.

This CO2 laser engraver includes 2 workbeds include the honeycomb platform and blade platform, they are suitable for engraving materials of different hardness, the honeycomb platform suits both hard and soft material and the blade platform suits hard material. The workbed can be automatically lift by the panel, thus the engraving progress can be more efficient. The included compatible 80w laser tube can cut deeper and engrave thicker material, it will help you complete lots of designs in the future. The display keeps you monitor the machine's working situation, the emergency stop button can immediately cut the laser working, also you can stop the engraving by opening its cover when occurs happen, then close the cover and press start to resume your work.

Compatible with the high ventilation performance, the debris born from the engraving progress can be easily blown into the large capacity wast collection bin inside the machine, which make you enjoy a easy cleaning. You just need to put the project on the workbed, then the machine can finish focus, you do not need to spend a long time on testing the machine repeatedly. LaserCutting:Acrylic, Wood, Leather, Plastics, Fabrics, MDF, Cardboard, Paper, Corian, Foam, Fiberglass, Rubber. Marking/Engraving:Acrylic, Wood, Leather, Plastics, Fabrics, Glass, Rubber, Cork, Brick, Granite, Marble, Tile, River Rock, Bone, Melamine, Phenolic, Aluminum, Stainless Steel, Titanium.

Cannot cut hardwoods like mahogany. CO2 laser machines only mark bare metals when anodized or treated. Some PVC-based acrylics can create toxic fumes when lasered.

What software is theis engravercompatible with? A:Adopts upgrade 6442 RUIDA system, RDworks & CorelLaser software are included also compatible with third party software Lightburn. What size is the engraving area?

A:24 × 35 in /600 × 900mm. Does the engraver have any internal storage? A:No, the machine has no internal storage and must be connected to computer. What is the maximal engraving depth of this engraver?

A:0-10 mm, varying according to materials and power. What materials can this engraver work with.

A:Organics /non-metal, wood, stone, leather, crystal, paper, and film, etc. How much is the laser power. Please note that if you are going to be working with machine for 8 hours or more per day that it is important to let the unit rest for a half hour every 4 hours. What picture format is it compatible with.

A:All formats that can be recognized by CorelDRAW or AutoCAD, including jpg. Does the product have wheels? A: Yes, our products have wheels at the bottom. There are several direct doors?

A: 4 pass-through doors make the machine can hold the engraving material lager than the machine itself from any direction. Our 80W CO2 laser engraver adopts upgrade 6442 RUIDA system, RDworks & CorelLaser software are included (also compatible with third party software Lightburn & AutoCAD, NOT INCLUDE), features 24 × 35 inches large size workbeds, high performance 80W laser tube, 4 pass-through doors, honeycomb & aluminum blade dual platforms, auto lift by pressing a button, 4 easy moving wheels, make it a laser engraver of great functionality. Tape for Laser Mirror Adjustment.

7 mm Acrylic Focus Tool. 4G USB Flash Drive (software). We always aim to put our customers first.

We excel at providing fast updated products to our customers and aim to provide the best service via our dedicated customer service, product and dispatch teams. Our team works tirelessly to ensure our consumers come first and this can be seen via our excellent track record. If you do encounter problems we are always on hand and happy to help just drop us a message.

This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "worldwide_aa" and is located in this country: US.

This item can be shipped to United States.


NAIZEA 80W Laser Engraver 24x35 Lightburn Engraving Machine, Autolift Autofocus


Home   Sitemap   Contact   Privacy Policy   Terms of Use