NAIZEA 20×28 60W Laser Engraver Cutter Machine Autolift Autofocus 60W

NAIZEA 20×28 60W Laser Engraver Cutter Machine Autolift Autofocus 60W
NAIZEA 20×28 60W Laser Engraver Cutter Machine Autolift Autofocus 60W
NAIZEA 20×28 60W Laser Engraver Cutter Machine Autolift Autofocus 60W
NAIZEA 20×28 60W Laser Engraver Cutter Machine Autolift Autofocus 60W
NAIZEA 20×28 60W Laser Engraver Cutter Machine Autolift Autofocus 60W
NAIZEA 20×28 60W Laser Engraver Cutter Machine Autolift Autofocus 60W
NAIZEA 20×28 60W Laser Engraver Cutter Machine Autolift Autofocus 60W
NAIZEA 20×28 60W Laser Engraver Cutter Machine Autolift Autofocus 60W
NAIZEA 20×28 60W Laser Engraver Cutter Machine Autolift Autofocus 60W
NAIZEA 20×28 60W Laser Engraver Cutter Machine Autolift Autofocus 60W
NAIZEA 20×28 60W Laser Engraver Cutter Machine Autolift Autofocus 60W

NAIZEA 20×28 60W Laser Engraver Cutter Machine Autolift Autofocus 60W

NAIZEA 60W CO2 Laser Engraver Laser Cutter Machine with Autolift LightBurn. This laser engraving cutting machine features a high power of 60W, compatible with high-performance CO2 tube, it can engrave thicker wood board, paper, cardboard, plastic, leather and the other non-metal material faster and deeper.

It has both honeycomb and blade engraving platforms, so that the machine can better engrave harder and softer objects (the blade platform suits hard objects/ honeycomb platform suits soft objects). You can control the lifting and switching of the platform with one button, thus achieving labor-saving and improving the engraving efficiency of the machine. This laser cutter provides you with a wider workbed of 20 × 28 inches, and the 4 pass-through doors design makes the laser cutter can accommodate super larger items need to be engraved. The transparent machine cover help you to monitor the engraving progess at any time, when an emergency occurs, press the emergency button or open the machine cover both can automatically cut off the power supply. 60W CO2 laser engraver adopts upgrade 6442 RUIDA system, RDworks & CorelLaser software are included (also compatible with third party software Lightburn & AutoCAD, NOT INCLUDE), features 20 × 28 inches large size workbeds, high performance 60W laser tube, 4 pass-through doors, honeycomb & aluminum blade dual platforms, auto lift by pressing a button, make it a laser engraver of great functionality.

The autofocus pen senses the correct focus distance from the laser head to the target material and signals the Z-axis motor to automatically raise or lower the workbed to the perfect focus height. A red dot pointer mounted on the laser head quickly indicates engraving points, marks the machine's path, and identifies positioning sizes, allowing an effortless project setup process. After the upgrade, the more sophisticated 6442 system can perform autofocus and complete more complex engraving graphics. At the same time, it also has password & key protection to prevent unauthorized use. These features greatly improve the safety performance of the machine.

RDworks & CorelLaser are inluded in the package (Compatible with third party software Lightburn & AutoCAD, INCLUDE). A transparent acrylic glass viewing window allows observation throughout the laser engraving process. Plus, it's equipped with a sepia tint to protect your eyes from indirect laser beam exposure. A pre-installed vent fan expels smoke and fumes to create a safer workspace and extend the service life of your machine. Pre-installed hoses along with the included water pump allow for a fast and easy setup.

Only use with distilled water, ensuring it stays between 60-70°F (16-21°C). LaserCutting:Acrylic, Wood, Leather, Plastics, Fabrics, MDF, Cardboard, Paper, Corian, Foam, Fiberglass, Rubber. Marking/Engraving:Acrylic, Wood, Leather, Plastics, Fabrics, Glass, Rubber, Cork, Brick, Granite, Marble, Tile, River Rock, Bone, Melamine, Phenolic, Aluminum, Stainless Steel, Titanium. Cannot cut hardwoods like mahogany.

CO2 laser machines only mark bare metals when anodized or treated. Some PVC-based acrylics can create toxic fumes when lasered. What software is theis engravercompatible with?

A:Adopts upgrade 6442 RUIDA system, RDworks & CorelLaser software are included also compatible with third party software Lightburn & AutoCAD, INCLUDE. What size is the engraving area? A:20 × 28 in /500 × 700mm. Does the engraver have any internal storage? A:No, the machine has no internal storage and must be connected to computer.

What is the maximal engraving depth of this engraver? A:0-10 mm, varying according to materials and power. What materials can this engraver work with. A:Organics /non-metal, wood, stone, leather, crystal, paper, and film, etc.

How much is the laser power. Please note that if you are going to be working with machine for 8 hours or more per day that it is important to let the unit rest for a half hour every 4 hours. What picture format is it compatible with.

A:All formats that can be recognized by CorelDRAW or AutoCAD, including jpg. Does the product have wheels? A: Yes, our products have wheels at the bottom. There are several direct doors? A: 4 pass-through doors make the machine can hold the engraving material lager than the machine itself from any direction.

Tape for Laser Mirror Adjustment. 7 mm Acrylic Focus Tool. 4G USB Flash Drive (software).

We always aim to put our customers first. We excel at providing fast updated products to our customers and aim to provide the best service via our dedicated customer service, product and dispatch teams. Our team works tirelessly to ensure our consumers come first and this can be seen via our excellent track record. If you do encounter problems we are always on hand and happy to help just drop us a message. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "worldwide_aa" and is located in this country: US. This item can be shipped to United States.


NAIZEA 20×28 60W Laser Engraver Cutter Machine Autolift Autofocus 60W


Home   Sitemap   Contact   Privacy Policy   Terms of Use