Monport 100W CO2 Laser Tube 1450mm 80mm Dia for 100w CO2 Laser Engraving Machine

Monport 100W CO2 Laser Tube 1450mm 80mm Dia for Laser Engraving Machine. Monport 100w CO2 Laser Tube for Laser Engraver. Product Weight: 44 lbs (20 kg).

The 100W borosilicate glass CO2 laser tube, with an expected service life of 8,000 operation hours depending on the power setting. Attention: Running the machine at a high power frequently will surely shorten the service life of the laser tube as follows. Laser tube lifespan 7,000-8,000 Hours. Laser tube lifespan 5,000-6,500 Hours. Not Recommended but Accessible Power 70-100%?

Laser tube lifespan 3.000-4,000 Hours. The preinstalled Cathode and Anode Wiress allow quick and effortless setup. Disconnect all power from your engraver and water cooling system. Connect the tube's electrodes with the matching poles of your laser power supply, positive first. Use the protective sheath around the anode to avoid any shorts or arcing.

Connect the tube's ports with the water tubes from your pump or chiller so that water will flow from the anode to the cathode. After ensuring everything is dry, reconnect power and run your water cooling system until no bubbles appear in the tube. If you pay means you agree with the postal service. If you have any question, feel free to send us a message and we will reply you within 24 hours. Due to the difference of time zone, sometimes the reply will be delayed with 24 hours(excluding weekend & holiday).

Enjoy your visiting and shopping here.