INSMA 2000mW USB Laser Graver Graveur Gravure Engraving Imprimante Machine DIY

Package includes: 1 x Laser engraver 1 x USB disk 1 x Screw driver 4 x Screws 4 x Screw caps 1 x Power cord 1 x USB cable 2 x Wooden board 1 x Manual Note: 1. The product is a laser carving machine for home use, a tool machine, can not be compared with laser carving machine for industrial use. Do not use the laser head to point at human or livestock, do not use laser to point at people's eyes. Skin exposure to laser is strictly prohibited.

The caving machine should not be stopped while workingit will cause a damage. This product not suitable for kids under age of 14. Do not fall or make any collision to the product.

Metal, glass, crystal and transparent or translucent stuff are can not be engraved. The color of the item may vary slightly due to photography and different PC monitor, and the size might be slightly errored due to manual measurement. Your kindly understanding would be appreciated. You might need to temporarily shut down the antivirus software before downloading the software.

Otherwise some files in the software would be mistaken for virus and deleted by antivirus software. Please according to the user manual to operate the machine. After 20 minutes of working, it need to take a break, can not work continuously for a long time. Insert the USB disk Step 2: Install the driver. Exe" Step 3: Must Copy the "English zip to Computer desktop and then unzip it.

Step 4: Connect the engraver to computer Step 5: Open the scarve-en. Exe" which is unzip from the "English zip" Specifications: Name: Laser Engraver ModelK3 Material: ABS(Acrylonitrile Butadiene Styrene plastic) Color: Black Size: 15.2x16.6x14.3cm (6"x6.5"x5.6") Power cord's length: 113cm(44.5") USB cable's length: 11cm(43.7") Plug type: US Plug Voltage: AC 110-220V Laser power: 2000mW Carving area: 80x80mm(3.1"x3.1") Carving depth: 1mm Applicable range: Plane surface Supporting systems: Windows XP/7/8/10 Supporting image format: JPEG/ JPG/ PNG/ BMP Features: a laser carving machine for home use, used for carving wood, plastic, leather, etc. Le paiement doit être reçu dans les 7 jours ouvrables suivant la clôture des enchères. Articles seront expédiés dans les 1-3 jour ouvrable lorsque nous avons reçu le paiement. Délai de livraison dépend de la destination et d'autres facteurs; 4. Les acheteurs internationaux se il vous plaît noter: a. Ces frais sont la responsabilité de l'acheteur. Nous ferons de notre mieux pour réduire le risque des droits de douane. Se il vous plaît vérifier avec le bureau de douane de votre pays pour déterminer ce que ces coûts supplémentaires seront avant d'acheter.

17 à 12:44:43 Paris, le vendeur a ajouté les informations suivantes. The item "INSMA 2000mW USB Laser Graver Graveur Gravure Engraving Imprimante Machine DIY" is in sale since Thursday, September 14, 2017. This item is in the category "Bricolage\Outils à main\Autres". The seller is "ecamonline2012" and is located in HK.

This item can be shipped worldwide.

• Numéro de pièce fabricant: Non Applicable
• Marque: - Sans Marque/Générique -