Glowforge PRO 3D Laser Printer, with accessory kit and material starter kit

Glowforge PRO 3D Laser Printer, with accessory kit and material starter kit
Glowforge PRO 3D Laser Printer, with accessory kit and material starter kit
Glowforge PRO 3D Laser Printer, with accessory kit and material starter kit
Glowforge PRO 3D Laser Printer, with accessory kit and material starter kit
Glowforge PRO 3D Laser Printer, with accessory kit and material starter kit
Glowforge PRO 3D Laser Printer, with accessory kit and material starter kit
Glowforge PRO 3D Laser Printer, with accessory kit and material starter kit
Glowforge PRO 3D Laser Printer, with accessory kit and material starter kit
Glowforge PRO 3D Laser Printer, with accessory kit and material starter kit
Glowforge PRO 3D Laser Printer, with accessory kit and material starter kit
Glowforge PRO 3D Laser Printer, with accessory kit and material starter kit
Glowforge PRO 3D Laser Printer, with accessory kit and material starter kit

Glowforge PRO 3D Laser Printer, with accessory kit and material starter kit
Glowforge PRO 3D Laser Printer, with accessory kit and starter kit. Printer is in box 1, weight 81 lbs, dimensions 47"x28"x15. Kit includes both the original standard accessory table (box 2 of 3, 14 lbs, in original box) and original sample material kit (box 3 of 3, 14 lbs, in original box).

Item was manufactured in December, 2018. Simple setup in under 30 minutes. Works with hundreds of materials. Live camera preview of your work.

Safe for home and school. What's in the Box. Glowforge Pro 3D Laser Printer. The Glowforge laser head with macro camera and autofocus.

Ring clamps for hose connection. These materials are sourced, encoded, and lab-tested for perfect printing every time and are specially formulated for the Glowforge 3D laser printer.

How does the Pro compare to other models? Upgraded hardware for improved speed. Enhanced cooling for all-day use. Giant-size prints with Passthrough Slot. Drag-and-drop with live camera preview.

Works with Mac, PC, iPhone, Android, and more. JPG, PNG, SVG, PDF, and more. Dual cameras: wide angle & macro. Precise to 1/1000th of an inch. Glowforge exterior (Pro, Plus, and Basic): 38 x 20.75 x 8.25 (965mm x 527mm x 210mm).

Maximum material depth: 18 (455 mm) for Basic and Plus; unlimited for Pro. Maximum material width: 20 (515 mm). 11 (279 mm) deep and 19.5 (495 mm) wide. Maximum material height: 2 (50mm).

Maximum material height with tray: 0.5 (13mm). Can safely print on any laser-compatible material, with examples below. Glowforge recommends Proofgrade materials for automatic settings and perfect results. Easy and powerful interface will have you printing in minutes.

Web interface works on Mac, PC, Linux, and many mobile devices (internet required). Compatible with JPG, PNG, SVG, PDF, and other file formats.

Drag-and-drop layout with live camera preview to position designs on the material. Automatically scan drawings and print without design software. Catalog of premium, customizable, ready-to-print designs.

When used with Proofgrade materials, automatically determines settings for perfect cutting and engraving. Wide Angle Camera Mounted on the lid, provides a view of the entire printable area, accurate within 0.25 (6mm). Macro Camera Mounted on the head, provides extreme up-close information for autofocus, accurate within 0.004 (0.1mm). Exquisitely precise low-power laser measurement scans the surface of the material to determine the exact height. Completely Internal Lens moves internally up and down inside the head to print on materials up to 0.5 (13mm) thick. Multipass Focus can be shifted between engrave passes, allowing detailed depth engraves. Manual focus option the laser can be focused at a precise height to experiment with a range of techniques.

Dual high-efficiency internal LED strips give your work broad illumination for a wide angle view. Headlights under the lid give point illumination for precise precisioning.

CO2 Laser Custom CO2 glass laser tube capable of continuous operation at 10,600 nm; rated at 45 watts for Pro and 40 watts for Plus and Basic. Fixed Alignment Factory calibrated optical system does not require any alignment by the user.

Sealed Optics Enclosed optical path with cleanable and replaceable windows protects the laser optics to avoid replacement or realignment. Case High modulus injection molded plastic. Linear System Custom extruded aluminum linear rails with belt driven v-wheel carrier. Motion Dual hybrid stepper Y axis; single hybrid stepper X axis. Cooling Closed loop self contained internal cooling. Air Assist Internal air assist with no external compressor hookup required. Recommended Operating Temperature: 60F-75F (16C-24C) Basic and Plus; 60F-81F (16C-27C) Pro.

Wi-Fi required (2.4 GHz b/g/n and WPA2, WPA, WEP, or open). Ventilation with either the Glowforge Compact Filter, or an open-able window within 8 feet.

110/220 VAC, 50 or 60 HZ outlet. Glowforge Basic, Plus, and Pro have 800W peak power consumption. Compact Filter has an additional 350W peak power consumption. Precision power settings allow enough control to draw lines on copy paper.

3D engrave settings carve detailed surfaces. Positioning precision to 0.001 (0.025mm). Engraving up to 1355 DPI. Pro Passthrough slot allows the use of material thats up to 1/4 (6.3mm) high, up to 20 (50.8cm) wide, and as long as desired.

Upgraded solid state thermoelectric cooling. AIR FILTER UPGRADE (AVAILBLE FROM MFR, NOT INCLUDED IN THIS LISTING).

NOT INCLUDED IN THIS OFFER. Features of the air filter upgrade. 350W brushless DC motor rated at 275 cfm. 60db-70db (similar to a vacuum).

Exterior dimensions (LxWxH): 16.14 x 10.43 x 16.92 (410mm x 265mm x 430mm). Safety sensors alert in case of bumps or unplanned movement. Safety sensors warn in case of overtemperature conditions. Safety sensors notify when fan performance changes. The Glowforge Basic and Glowforge Plus are Class 1 laser devices with no special training required. The Glowforge Pro is a Class 4 laser device and comes with all necessary safety training materials.

Certified to UL/ANSI/IEC 60950-1-07 and CAN/CSA-C22.2 NO. 60950-1-07 (R16) by TUV Rhineland. The item "Glowforge PRO 3D Laser Printer, with accessory kit and material starter kit" is in sale since Thursday, June 18, 2020. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving".

The seller is "rybl_3033" and is located in Orlando, Florida. This item can be shipped to United States.


Glowforge PRO 3D Laser Printer, with accessory kit and material starter kit


Home   Sitemap   Contact   Privacy Policy   Terms of Use