Engraver Cutter with USB Interface Laser Engraving Machine 60W 110V CO2 New

Baby, Kids Toys & Products. Please do NOT place the order if you need the product now as we are on pre-sale, deliveries will NOT start until May 20 2017, sorry for the inconvenience and thanks for your understanding. Please provide us with the valid commercial address. The best way to describe how this lasers work is to compare it to your printer. This devise uses the images you would typically print on paper, but instead, a CO2 laser beam is fired on the surface which engraves the design on the material. Laser: CO2 laser source, 60 watts. Engraving Materials: Wood, cork, veneer, rubber, jade, acrylic, plastic, glass, fiberglass, marble, corian, leather, fabric, cloth, coated metals, anodized aluminum, ceramics, tile, mylar, delrin, melamine, paper, pressboard, matte board and more. Cutting Materials: Wood, acrylic, plastic, corian, delrin, cloth, leather, melamine, paper, pressboard, matte board, mylar, rubber, veneer, cork and more.

We strive to provide the best image quality, speed, reliability, and ease of use. By using only the highest-quality components, our lasers are known for their reliability and performance. No additional, expensive lens packages needed to get the highest resolution engraving thanks to our Radiance Optics. Provides a visible laser beam to determine exactly where the laser will fire.

Designed to last for a long time without wobbling, failure and replacement of the plastic bearings. Precision drive belts are made from the sturdiest, belt (x-axis) and steel cord (y-axis). Front and back drop-down doors for easy access. You can open the two doors to accommodate larger material.

Easily access the back of your machine for cleaning and maintenance. Provides the best operator safety features available. Easily map different speed and power settings to create different colors in your file. Its DSP Control System works with most graphics design programs, such as CorelDraw, AutoCAD, etc.

This software allows you to create same shape patterns with different colors. Network the Laser Across Your Business.

Communicates with your laser through Ethernet or USB. Blows a constant stream of air on the cutting area. The adjustable table can easily be moved up and down to fit a wide variety of engraving materials and products.

Digitally controlled CO2 laser tubes are fully modular, permanently aligned and field replaceable. Attach an air compressor to our included Air Assist to.

Remove excess heat and combustible gases from the cutting surface by directing a constant stream of compressed air across the cutting surface. Your K60-0750 Laser can work with a wide range of software packages - from design programs to spreadsheet applications to CAD drawing packages. Since the laser beam is invisible, a Red Dot Pointer on the Fusion Laser allows you to have a visual reference for locating where the laser will fire. Ground and polished stainless steel long-lasting bearing system. Controlled up to 4500 dpi.

Color mapping links speed, power and focus to any RGB color. Size (W x D x H). 45" x 33.8" x 38(1150 x 860 x 970 mm). Auto-switching power supply accommodates 110 volts, 60 Hz, AC.

An Air Compressor can work with the included Air Assist features of the laser systems. Direct a constant stream of air to your cutting surface to remove heat and combustible gases from the work area. CO2 lasers will mark bare metals when coated with a metal marking solution.

1x bag with allen wrenches. 1x roll of double faced tape.

Is the laser safe to operate? Yes, the laser is completely safe to operate. It is secured with interlock devices so it will not run with the devise door open.

Can the laser engrave metal? Our CO2 laser systems are mainly designed to engrave and cut non-metallic materials, they can also be used to mark on metal with the aid of metal-marking compound. Can the laser cut through metal? But it will still mark on coated metal, even though our system is not ideally suited for metal applications.

Didn't find the answer to your question? Clicking "Ask a Question" at the bottom of this page. We're happy to help you with anything! We choose the corresponding carrier according to the product's dimensions, weight and recipient address.

Box, and will require a physical address. Box, we will contact you for an alternate address. Our warehouse location shown below.

We do our best to get orders out the door as soon as possible using the fastest method available. Ensure all auctions have ended and/or all items are in your cart prior to visting checkout. We stand behind out products so you are always covered!

Your Feedback Is Important to Us. We work very hard to exceed your expectations by offering a quality product at a competitive price, all while providing the BEST customer experience in the industry.

However, we understand that mistakes can happen and incidents do occur. Our dedicated customer care staff can be reached TOLL FREE from anywhere in the US.

We have not forgotten about you! Your kind consideration would be highly appreciated. Our 30-day Satisfaction Guarantee assures our customers that they will receive all orders promptly and exactly as described. Used items will not be accepted for return. The item "Engraver Cutter with USB Interface Laser Engraving Machine 60W 110V CO2 New" is in sale since Sunday, December 18, 2016.

This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "seriouswholesaler" and is located in Anaheim, California. This item can be shipped to United States.

Brand: Tek Genius
Control system: DSP
Working size: 500 mm x 700 mm with double side open
Up and down work plate: 7.8" (200 mm)
Laser tube type: CO2 Glass sealed laser tube
Laser power: 60 W
Driver type: Micro Stepping Motor
Max speed: 1000 mm/s (different materials differ)
Resolution: 1000 DPI
Location precision: 0.01 mm
PC Interface: USB 2.0 and USB Disk
Software: RDWorks V8, PowerCut, CorelDraw or AutoCAD
Image Form: HPGL, BMP, GIF, JPG, JPEG, DXF, DST, AI
Machine Dimension (L / W / H): 1150 * 860 * 970 (mm)
Package Dimension (L / W / H): 1700 * 1000 * 1200 (mm)
Package: Standard Wooden case for export
N.: 407.86 lbs
Maximum engraving depth: 3-4mm for acrylic, wood, 2-3mm for harder material
Maximum cutting depth: 5mm for acrylic, wood, 4mm for harder materials
Maximum engraving area: 700 * 500 mm
MPN: Does not apply
Warranty: 2 years warranty
Color: Black and yellow