EleksMaker EleksLaser-A3 Pro Laser Engraving Machine CNC Laser Printer

How to Assemble The Laser Machine. There Are Two Videos Showing How to Assemble The. Photo, Word, Scan, outline, Pixel Laser Engraving. Candle, EleksCam, T2-Laser, Benbox, GrblController, LiteFire, Laser GRBL, etc. 30x40cm / 11.81 x 15.75inch (maximum).

58x40x14cm / 22.83x15.75x5.51inch (LWH). 60x46x18cm / 23.62x18.11x7.09inch (LWH). Ideal for amateur laser engraving usage low-light positioning and freedom positioning functions. Ultra large engraving area, gantry shape design, no engraving height limitation. Three stepper motor drive providing. Please wear laser goggles during usage and avoid touching the laser directly with your eyes and skin! This is a whole assemble set and needs to assemble by your own. Many operative problem can be solved according to your video.

It can effectively save your time and energy if you send the video to us with the problem description. 1x Laser Engraver Assembling Kits (Without laser module). How to assemble the kit?

What software can support this machine? Supported Image Format: jpg, bmp, svg, G-code Supported Engrave Mode: Photo, Word, Scan, Outline, Pixel Laser Engraving.

What system can the EleksCAM support? PC Win XP 7/8/10 , Laptop is ok, too. My laser doesn't work, what should I do?

If the machine does not work, it might because. ÃÂ¢Ã¢â¬ËÃÂ The wire connection is wrong. Please check the connection like the picture shown.

ÃÂ¢Ã¢â¬ËÃÂ¡ Your computer could not support the software. Please use Win XP 7/8/10 to check it. Please check whether wires are inserted rightly. ÃÂ¢Ã¢â¬ËÃÂ¤ Driver board/power supply is broken.

Please check which part is the main problem, and then send us a video to prove it. Or you can send us a video about your software setting, working laser and driver board. We will analyze it and give you a solution.

5: My software shows: Not data, what should I do? There might be two reasons. ÃÂ¢Ã¢â¬ËÃÂ You did not open Administrator privileges to run the software. ÃÂ¢Ã¢â¬ËÃÂ¡ Your computer architecture is incomplete:check whether VC ++ and. Net and directX are installed, and have to turn off the virus. Can I regulate the laser power or the laser power is adjustable? Our new Mana SE controller board can adjust the power. Please download our ElekesCAM software and firmware to do it. Or benbox software and benbox firmware.

Please note that two firmware is not the same. Details are shown in the EleksCAM & Benbox software instruction above. Can I upgrade stronger power laser module by myself? Can I extent rail frame?

DC12V laser module can be installled on this machine. You can also extent the frame by yourself, but we do not provide rails. But when I begin to make it work with EleksCAM software, it does not move. The EleksCAM could move by hand but could not move when focus. The probelm is the area and language inside the system control panel. Please set the format to English and United States. Then it will be ok.

Detail is shown in the wiki link above. If my laser is broken and I might find the reason(Or I could not find).

ÃÂ¢Ã¢â¬ËÃÂ Find the reason: Take a video to prove the part is broken and then send it to us. We will give you a solution according to your video. ÃÂ¢Ã¢â¬ËÃÂ¡ Could not find the reason : Check the Question 4 first. If the problem could not be solved, please feel free to contact our customer service with a video. The video should contain software setting, broken part details and the power-on machine.

We will solve it asap. The item "EleksMaker EleksLaser-A3 Pro Laser Engraving Machine CNC Laser Printer" is in sale since Monday, July 16, 2018. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "quakoi" and is located in Compton, California.

This item can be shipped to United States.

MPN: 1027611
UPC: Does not apply
Brand: Unbranded/Generic