EleksMaker EleksLaser-A3 Pro Engraving Machine CNC Laser Printer +2500mW Laser

EleksMaker EleksLaser-A3 Pro Engraving Machine CNC Laser Printer +2500mW Laser

EleksMaker EleksLaser-A3 Pro Engraving Machine CNC Laser Printer +2500mW Laser

EleksMaker EleksLaser-A3 Pro 2500mW Laser Engraving Machine CNC Laser Printer. Black and Blue laser module will be sent randomly in US/AU Warehouse. (Only case color difference) 2. The frame joint is upgraded and will be easier to assemble. (Remove corner joints and add rubber pads) You might receive the new/old version randomly.

Please make sure you know it. Specifications: - Brand:EleksMaker - Model:EleksLaser-A3 pro 2.5W - Control Board:EleksMana SE - Communication Port:MircoUSB - Laser Quick Replace:Support - Stepper Motor:42H34S-1304A - Power Input:AC100-240V - Sysytem Support:Win XP/7/8/10 - Engrave Mode:Photo, Word, Scan, outline, Pixel Laser Engraving - Supported Formats:jpg, bmp, svg, G-code - Material:Stainless Steel and Acrylic - Working Voltage:DC 12V - Working Current:DC 4-5A - Laser Power:2.5W/2500mW - Control Software System:Candle, EleksCam, T2-Laser, Benbox, GrblController, LiteFire, Laser GRBL, etc. Engraving Accuracy:0.01mm - Engraving Area:30x40cm/11.81x15.75inch(maximum) - Engraved object height limitatiion:No Limitation - Packaging Size:58x40x14cm/22.83x15.75x5.51inch (LWH) - Assembled Product Size:60x46x18cm/23.62x18.11x7.09inch (LWH) - Package Weight:4.60kg - Can Engrave:Wood, Plastic, Paper, Bamboo, Ox Horn, Leather, Sponge Paper, etc. Features: - 30X38cm ultra large engraving area, gantry shape design, no engraving height limitation. Three stepper motor drive providing faster moving speed.

2500mW violet laser module with heatsink, high laser engraving power and long-term available. Laser module self-checking tips link. Please wear laser goggles during usage and avoid touching the laser directly with your eyes and skin! The red cord is DC12v(+), black cord is GND(-), yellow cord is signal(S). Please make sure you know the wire position and connect to the ManaSE board correctly.

If you have any quality problem(Except individual situation like using the laser module more than 30 minutes per time and casue the damage), please feel free to ask our customer service for a help. Many operative problem can be solved according to your video and problem description. How to assemble the kit? The whole assemble and operating manual link.

You can also watch the video to do it. What software can support this machine? Supported Software: EleksCam, T2-Laser, Benbox, GrblController, LiteFire, Laser GRBL, etc. Supported Image Format: jpg, bmp, svg, G-code Supported Engrave Mode: Photo, Word, Scan, Outline, Pixel Laser Engraving. What system can the EleksCAM support? PC Windows XP/7/8/10, Laptop is ok, too. My laser doesn't work, what should I do? If the machine does not work, it might because: The wire connection is wrong.

Please check the connection like the picture shown. Your computer could not support the software. Please use Win XP 7/8/10 to check it.

Please check whether wires are inserted rightly. And then check your data setting. The kit misses some accessories. Laser module/ driver board/power supply is broken. Please check which part is the main problem, and then send us a video to prove it. Or you can send us a video about your software setting, working laser and driver board. We will analyze it and give you a solution. My software shows: Not data, what should I do? There might be two reasons. You did not open Administrator privileges to run the software. Can I regulate the laser power or the laser power is adjustable? Our new Mana SE controller board can adjust the power. Please download our ElekesCAM software and firmware to do it. Or benbox software and benbox firmware. Please note that two firmware is not the same. Details are shown in the EleksCAM & Benbox software instruction above. Can I upgrade stronger power laser module by myself? Can I extent rail frame? DC12V laser module can be installled on this machine. You can also extent the frame by yourself, but we do not provide rails.

But when I begin to make it work with EleksCAM software, it does not move. The EleksCAM could move by hand but could not move when focus. The probelm is the area and language inside the system control panel.

Please set the format to English and United States. Then it will be ok. Detail is shown in the wiki link above. My laser module is always on and could not turn off.

Please try to connect the Signal(S) and GND(-). If the laser module turn off, that means the laser module is ok, the problem might be the ManaSE board or software setting.

If the laser module is still on, that means the laser module might be damaged. You can check as the video shown. Or unpaid dispute will be filed for non-payer after 7 days of sales day. If you receive defective item, please kindly notify us within 14 days. The item "EleksMaker EleksLaser-A3 Pro Engraving Machine CNC Laser Printer +2500mW Laser" is in sale since Wednesday, January 24, 2018.

This item is in the category "Business & Industrie\Metallbearbeitung & Schlosserei\Maschinen\Fräsmaschinen". The seller is "outstandingdeal" and is located in . This item can be shipped worldwide.


EleksMaker EleksLaser-A3 Pro Engraving Machine CNC Laser Printer +2500mW Laser


Home   Sitemap   Contact   Privacy Policy   Terms of Use