EleksMaker EleksLaser-A3 Pro 2500mW Laser Engraving Machine CNC Laser Printer

EleksMaker® EleksLaser-A3 Pro 2500mW Laser Engraving Machine CNC Laser Printer. Now we all supply the new version of EleksMaker A3-2500 as the pictures shown. New version means the improved appearance of machine, while you can know what the old version looks like via the first video above. The frame joint is upgraded and.

Will be easier to assemble. Remove corner joints and add. Please use the OFFICIAL software.

And DO NOT use Benbox to control EleksMaker A3, which. May possibly cause the hardware damage in controller board.

58x40x14cm / 22.83x15.75x5.51inch (LWH). 60x46x18cm / 23.62x18.11x7.09inch (LWH). Wood, Plastic, Paper, Bamboo, Ox Horn, Leather, Sponge Paper, etc. Metal, Stone, Ceramics, Glass, Reflective or Transparent Material.

Photo, Word, Scan, outline, Pixel Laser Engraving. 30x40cm / 11.81 x 15.75inch (maximum). Official Software EleksCAM Download & Instructions. Please wear laser goggles during usage and avoid touching the laser directly with your eyes and skin! Red cord is DC12v(+), black cord is GND(-), yellow cord is signal(S).

Please make sure you know the wire position and connect to the ManaSE board correctly! If you have any quality problem(Except individual situation like using the laser module more than 30 minutes per time and casue the damage), please feel free to ask our customer service for a help. If your laser module has any problem, please.

Dismantle it without our permission. It will destroy the laser module.

Many operative problem can be solved according to your video and. 1 Set x 2500mW Laser Engraving Machine (Need to be assembled yourself).

How to assemble the kit? What software can support this machine? Supported Image Format: jpg, bmp, svg, G-code Supported Engrave Mode: Photo, Word, Scan, Outline, Pixel Laser Engraving. Can I use other software like Candle. This control board can support other software.

But since some software may affect the chip, when you change the software to control the machine, there will be no response, and you can only use the original software. So if you want to use other software, please keep using it.

When you change to other software, they may affect each other. Among these software, EleksCam is developed by official EleksMaker with the best compatibility and it's also easy to fix when something goes wrong.

What system can the EleksCAM support? PC Windows XP/7/8/10 , Laptop is ok, too.

My laser doesn't work, what should I do? If the machine does not work, it might because. The wire connection is wrong.

Please check the connection like the picture shown. Your computer could not support the software.

Please use Win XP 7/8/10 to check it. Please check whether wires are inserted rightly. The kit misses some accessories. Laser module/ driver board/power supply is broken. Please check which part is the main problem, and then send us a video to prove it.

Or you can send us a video about your software setting, working laser and driver board. We will analyze it and give you a solution. Laser module self-checking tips link is here. 5: My software shows: Not data, what should I do? There might be two reasons.

You did not open Administrator privileges to run the software. Your computer architecture is incomplete:check whether VC ++ and. Net and directX are installed, and have to turn off the virus. Can I regulate the laser power or the laser power is adjustable? Our new Mana SE controller board can adjust the power.

Please download our ElekesCAM software to do it. Can I upgrade stronger power laser module by myself?

Can I extent rail frame? DC12V laser module can be installled on this machine. You can also extent the frame by yourself, but we do not provide rails.

But when I begin to make it work with EleksCAM software, it does not move. The EleksCAM could move by hand but could not move when focus. The probelm is the area and language inside the system control panel. Please set the format to English and United States. Then it will be ok.

Detail is shown in the wiki link above. My laser module is always on and could not turn off. Please try to connect the Signal(S) and GND(-). If the laser module turn off, that means the laser module is ok, the problem might be the ManaSE board or software setting. If the laser module is still on, that means the laser module might be damaged.

You can check as the video shown. If my laser is broken and I might find the reason(Or I could not find). Find the reason: Take a video to prove the part is broken and then send it to us.

We will give you a solution according to your video. Could not find the reason : Check the Question 4 first.

The video should contain software setting, broken part details and the power-on machine. We will solve it asap. Some products have different policies or requirements associated with them. First, please kindly provide us with proof as below. Photos of the front and back of the packaging envelope or box.

Photo, video, screenshot, or description of the defective item. Photo, video, screenshot, or description of the defect or defective area. How to cancel your order.

Just placed an order but changed your mind? Here is the easy way to get your order canceled. How to cancel an order before it ships.

How to cancel pending orders. When the item arrives reject it when the carrier arrives, or accept it and send it back to us. The item "EleksMaker EleksLaser-A3 Pro 2500mW Laser Engraving Machine CNC Laser Printer" is in sale since Friday, April 26, 2019. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving".

The seller is "protoolsgeny" and is located in Saint Rose, Louisiana. This item can be shipped to United States.

• Brand: Unbranded
• MPN: Does Not Apply
• UPC: Does Not Apply