CW-3000DG Industrial Water Chiller For Laser Engraver Cutter Engraving Machine

SPINDLE MOTOR AND INVERTER VFD. Steam generator for bath SPA. Listing for Winit and 4PX. Small Value Product in U.

Motorized Climbing Wheelchair Stair Chair Stairlifts Mobility Elevator Battery. 1.5KW 2" x 82" Knife Belt Grinder With 2 HP Motor 3 in 1 Multifunction Sander. Repair Tools Bike Torque Wrench Hexagon Holes Multi Tool Cycling Spanner New. CW-3000DG Industrial Water Chiller For Laser Engraver Cutter Engraving Machine. CW-3000DG is a professional cooling machine referring to the international, advanced thermolysis cooling system design, suitable for small water-cooled cooling devices. Economic cooling equipment, is easy to install and operate, compact and easily movable. It is designed for cooling the one CO2 glass laser tube under 60W/80W of the laser engraving and cutting machine. Comprehensive reference to the international radiator - type cooling system. With completed water flow and over high temperature alarm functions. Professional forced air - cooled radiator. Equipped with alarm output port.

CW-3000DG laser water chiller is suitable for small water cooling device. Provide stable working conditions for laser devices.

Water can be used for a long time. High heat dissipating capacity and hard to be blocked. Alarm output port can quickly protect sensitive components. Specific disconnection alarm securing protection.

High cost performance, low failure rate. Force circulation, 8L cooling tank capacity. It can extend the service life of laser tube and ensure the engraving effect better.

Open the package and check the machine and all accessories. Open the mouth screw on the top of machine, then add cooling water(Please don't activate the machine without water). Connect the inlet and outlet hose between water cooler and laser engraving machine. Connect the power cable, turn on the power switch(Note: Don't let the water overflow). Check the radiator water level again(Keep that the distance between water level and mouth is 80-150mm).

Owing to long use of cooling machine, you should open the machine and clean the dust in order to ensure good heat dissipation. You can use non-corrosive antifreeze if you are in the northern cold regions.

A cooler water condition in the absence of electricity is prohibited! Location placed cooler should select a well-ventilated and dry environment, away from other heat sources. Outlet of the back of the cooler should be away from obstruction for more than 30cm(11.8''), both sides of the inlet should be away from obstructions for more than 10cm(3.9''). When the cooling machine is useless for too long or in transportation, it must be empty of water. CW3000DG water chiller is equipped with high speed fans inside, which is unable to control the water temperature.

To protect the laser tube, cooling fan will suspend the work when the water temperature is lowapprox. 10, and it will continue to work when the water temperature rise to higherapprox. The appliance is not to be used by persons with reduced physical, sensory or mental capabilities or a lack of experience and knowledge, unless they have been given supervision or instruction.

Children are supervised not to play with the appliance! Way of Circulation: Water Pump Force Circulation.

Pumping Lift: 9m(29.5ft). Inlet and Outlet: External Dia. Package Size: 550×450×355mm (21.7×17.7×14in). 1 × CW3000DG Water Chiller Machine.

1 × Power Cable(US Plug). Locations: California Warehouse: City of Industry, CA.

Please do check everything carefully when receiving the package. Failure to do so might result in damage to your own rights and interests. Our company is an emerging professional Cross-Border Electronic company. So far we have finished the assets re-organization and obtained wholesale financing. We guarantee every product is of high quality and durable utility compared to other factories becayse we choose the best-buys goods.

We are really appreciated if you would like to give us your valuable positive comment(s) after you receive our products, which is a huge encouragement for us to make our products and service better and better. Hope you will love our items. Any questions will be answered promptly, so please feel free to let me know your concern. The item "CW-3000DG Industrial Water Chiller For Laser Engraver Cutter Engraving Machine" is in sale since Tuesday, September 27, 2016.

This item is in the category "Business & Industrial\Healthcare, Lab & Dental\Medical & Lab Equipment, Devices\Water Baths, Circulators & Chillers".jean" and is located in City of Industry, California.

This item can be shipped worldwide.

Amount of Cooling: 50W/
Brand: Tai Shi
Country/Region of Manufacture: China
Current: 0.9A
Gross Weight: 11.45kg
Inlet and Outlet: External Dia.
Pumping Lift: 29.5ft
Model: CW-3000DG
MPN: MG2019062254
Power: 99W
Product size: 20.8×20.7×11"
Protection: Flow Alarm
Tank Capacity: 8L
Type: CW-3000DG industrial water chiller
Voltage: 110V,60HZ
Way of Circulation: Water Pump Force Circulation