Co2 Laser Tube + Laser Power Supply 80W for Laser Engraving cutting machine

Co2 Laser Tube + Laser Power Supply 80W for Laser Engraving cutting machine
Co2 Laser Tube + Laser Power Supply 80W for Laser Engraving cutting machine
Co2 Laser Tube + Laser Power Supply 80W for Laser Engraving cutting machine
Co2 Laser Tube + Laser Power Supply 80W for Laser Engraving cutting machine
Co2 Laser Tube + Laser Power Supply 80W for Laser Engraving cutting machine
Co2 Laser Tube + Laser Power Supply 80W for Laser Engraving cutting machine
Co2 Laser Tube + Laser Power Supply 80W for Laser Engraving cutting machine
Co2 Laser Tube + Laser Power Supply 80W for Laser Engraving cutting machine
Co2 Laser Tube + Laser Power Supply 80W for Laser Engraving cutting machine
Co2 Laser Tube + Laser Power Supply 80W for Laser Engraving cutting machine
Co2 Laser Tube + Laser Power Supply 80W for Laser Engraving cutting machine
Co2 Laser Tube + Laser Power Supply 80W for Laser Engraving cutting machine

Co2 Laser Tube + Laser Power Supply 80W for Laser Engraving cutting machine

PRODUCT PARAMETERS- CO2 laser tube: Power output: 80W, Length: 1230mm, Beam diameter: 2.5mm, Wavelength: 10.64microns; CO2 laser power supply:Power: 80W, Input Voltage: AC220V, Max Output Voltage: 26KV, Max Output Current: 28mA. TEMOO MODE & FAST RESPONSE- The 80w laser tube adopts the TEMOO mode, which is characterized by high spot concentration, high energy density. This power supply uses a zero-current half-bridge soft switching circuit to make the power supply respond quickly and easily cooperate with the co2 laser tube. SIMPLE PORT CONTROL - Suitable for high and low-level signals.

Use the TTL level to control the laser start and stop. At the same time, a protection switch is added to detect whether there is water or ventilation outside. LONG SERVICE LIFE- The laser tube 80w uses special coating technology inside, which greatly improves the service life. The laser tube power supply has an open circuit protection function to avoid damaging the laser power supply.

WORKS COOPERATIVELY- The laser power supply has a good matching performance with the laser tube, and can be directly connected to the laser; the power supply can make full use of the performance of the co2 laser, improve the conversion efficiency, and extend the life of the laser. The laser tube and laser power supply may be in different stock, so they may be sent separately. Pls do not worry, you will receive All the parcels in recent days after the order. The 80 Watt laser tube is made of boron silicate glass, high temperature, and high-pressure resistance; The laser power supply has fast response speed and high cutting ability, which can prolong the service life of the laser tube.

The TTL level easily controls the start and stop of the laser power supply. Each data is marked for your convenience. TEMPO mode is applied to laser cutting tubes to provide better high spot density and high energy density. Equipped with an output mirror, you can further improve the model.

Laser power is adjustable, two methods to adjust laser power: Input 0V to 5V analog signal, it also can input the PWN signal. Open circuit protection function, it can be used to detect the presence or absence of waterway, protect the laser; It can better protect the laser power, and prolong the service life. The laser power supply is small in size, light in weight, easy to operate, and has excellent matching performance with the laser tube. It can be directly connected to the laser tube, eliminating the cumbersome and severe ballast resistors.

Co2 Laser Tube & Laser Power Supply. Professional laser tube and CO2 laser power, they are mainly used in laser engraving machine, laser marking machine, and laser cutting machine. The power supply has an excellent matching performance with the laser tube. Also, it can make full use of the performance of the co2 laser, improve the conversion efficiency, and extend the life of the laser. TEMOO Mode & Fast Response. Gross Weight: 14.5kg(31.961lbs). Package Size: 141 x 32 x 27cm/55.51 x 12.59 x 10.62inch. Gross Weight:2.3kg/5.11lbs. Package Size: 27x20x14cm/10.62x7.87x5.51inch. 1 x High Voltage Connector. 1 x Laser Power Supply (80W). We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. California Warehouse: City of Industry, CA. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's your fault. Caifornia Warehouse: 18501 Arenth Ave, City of Industry, CA 91748. 300 W Airtex Blvd, Suite 200, Houston, TX 77090. 2125 Gateway Blvd, Hebron, KY 41048. 1000 High Street, Perth Amboy, NJ 08861. The item "Co2 Laser Tube + Laser Power Supply 80W for Laser Engraving cutting machine" is in sale since Saturday, June 6, 2020. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "ganfeii1_4" and is located in Perth Amboy, New Jersey. This item can be shipped to United States, Canada.
Co2 Laser Tube + Laser Power Supply 80W for Laser Engraving cutting machine


Home   Sitemap   Contact   Privacy Policy   Terms of Use