Windows(Do not support Mac). CNC 3018 Pro Firmware GRBL v1.1 control Diy mini cnc machine, 3 Axis pcb Milling machine, Wood Router laser engraving, with offline controller The 3018PRO is easy to operate and supports offline. The control panel is also equipped with a versatile 3018 board. It supports 2P or 3P lasers. Equipped with a laser with a 33mm acrylic blue size.CNC 3018-PRO is an upgraded version of 3018. Control software: GRBL; Supported System: Windows XP / Win 7 / Win 8 / Win 10.
Working area :30×18×4.5cm Frame size:33×40×24cm Mesa:30×18cm Spindle:775 spindle motor(12-36V)24V:10000r/min Step motor:Fuselage 1ength 34M, Current 1.33A, 12v. Torque 0.25N/M Power supply:24V 5.6A Software:GRBL controller (Firmware GRBL v1.1) supported system:Windows(Do not support Mac) Drill bits:Free 10pc drill bit clamps:Free 4pcs.
1pcs Full set engraving machine 4pcs clamp 10pcs bits 1pcs extension rod with ER11 collet. Q: Whats the different between 500mw laser, 2500mw laser, 5500mw laser A: All these lasers can not engrave/mark on any metal, they are mainly used on engraving wood.
2500mw laser can cut about 1mm normal wood. 5500mw laser can cut about 2mm normal wood, engrave on leather and soft plastic. Laser: 500mw 405nm, 12v / 2500mw 450nm, 12v / 5500mw 450nm, 12v clamps: 4 pcs, Hold the thickness of 0-30mm, size: 50 20 3 (length width thick), the inner slot width 6mm.
This machine does not work on metal. Mainly used to engrave wood. Please note MDF is not equal to normal wood, as it doesnt have a worldwide standard, so you need to test how deep the laser can cut by yourself. Immediately you paid for the order. Communication always is best way to solve problem.We accept any return in 14 or 30 days that we promise. If item is defect or wrong when it. Please never return the parcel without agreement.
From us, it is no possible for us to get the parcel. Because the Ratings below 5 are equal to You are NOT satisfied. Your recognition is our motivation in developing our small company and improving our service for each customer.
It'll take you one minute only. If you're not satisfied with our goods or service, please write to us immediately so that we can help you out. Sincerely hope you do not leave us any negative or neutral feedback. Communication is very important, we believe we can resolve all the problem with each other.
We will give you the best advise. We welcome to answer any questions you have. The item "CNC3018 DIY 500MW Laser Engraver Cutter Wood Engraving Metal PCB Milling Machine" is in sale since Friday, June 21, 2019. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Woodworking Equipment\Routers". The seller is "mostvalued" and is located in Shenzhen.
This item can be shipped worldwide.