CLEARANCE! 60W CO2 Laser Engraving Machine 16×24 workbed withLightburn Home DIY

60W 3D CO2 Laser Engraving Machine 16 × 24 workbed for Office Engraving Supplies. 60W CO2 laser engraver adopts upgrade 6442 RUIDA system, RDworks & CorelLaser software are included (also compatible with third party software Lightburn & AutoCAD, NOT INCLUDE), features 16 × 24 inches large size workbeds, high performance 60W laser tube, 2 pass-through doors, honeycomb & aluminum blade dual platforms. This CO2 laser engraver has both honeycomb and blade engraving platforms, so that the machine can better engrave harder and softer objects. The honeycomb platform suits soft material and the blade platform suits hard material.

A red dot pointer mounted on the laser head quickly indicates engraving points, marks the machine's path, and identifies positioning sizes, allowing an effortless project setup process. There's always extra room! Equipped with front and rear pass-through doors to accommodate materials larger than the workbed size. A transparent acrylic glass viewing window allows observation throughout the laser engraving process. Plus, it's equipped with a sepia tint to protect your eyes from indirect laser beam exposure. A pre-installed vent fan expels smoke and fumes to create a safer workspace and extend the service life of your machine.

Pre-installed hoses along with the included water pump allow for a fast and easy setup. Only use with distilled water, ensuring it stays between 60-70°F (16-21°C). Laser engraver with LCD digital display makes you easily monitor the laser tube temperature and adjust the machine's power suits the thickness of the engrave item.

There also include a Emergency Shutdown Button can immediately cut-down the power when urgency happen. 2 pass-through doors make the machine can hold the engraving material lager than the machine itself. Quality power source can provide the laser tube with continuous power, this it will provide the laser engraver with longer service life. Honeycomb and Blade Operate Platforms.

This CO2 laser engraver includes 2 workbeds include the honeycomb platform and blade platform, they are suitable for engraving materials of different hardness, the honeycomb platform suits both hard ans soft material and the blade platform suits hard material. The included compatible 60w laser tube can cut deeper and engrave thicker material, thus it will help you complete lots of designs in the future.

The display keeps you monitor the machine's working situation, the emergency stop button can immediately cut the laser working, also you can stop the laser working by opening its cover when occurs happen. The cover of this machine is transparent. You can monitor the engraving progress of the project at any time. Once an emergency occurs, the laser working can be cut off immediately by the emergency button or by opening the cover. In addition, the transparent part of the cover has an eye protection coating.

Protect your eyesight to a great extent. The upgraded ventilation system includes a new exhaust fan, it enables the machine to have better ventilation, can blow away the dust generated during its work, and avoid affecting the engraving process of the machine. Secondly, it can reduce the working temperature of the machine and improve the stability of engraving. Tape for Laser Mirror Adjustment. 7 mm Acrylic Focus Tool.

4G USB Flash Drive (software). LaserCutting:Acrylic, Wood, Leather, Plastics, Fabrics, MDF, Cardboard, Paper, Corian, Foam, Fiberglass, Rubber.

Marking/Engraving:Acrylic, Wood, Leather, Plastics, Fabrics, Glass, Rubber, Cork, Brick, Granite, Marble, Tile, River Rock, Bone, Melamine, Phenolic, Aluminum, Stainless Steel, Titanium. Cannot cut hardwoods like mahogany.

CO2 laser machines only mark bare metals when anodized or treated. Some PVC-based acrylics can create toxic fumes when lasered. We Only deliver to East of US now, will be in Stock in West or Middle of US Soon. If you are in West or Middle of US, Please Wait and Order in the Recent Future, Thank you!

This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "lovezt1470" and is located in this country: US.

This item can be shipped to United States.

Brand: Unbranded
Model: SH-G460
Processing/Cutting Area: 15.7\
Laser Capacity: 60W (adjustable from 0-100%)
Powr Supply and Consumption: 110V/60HZ1200W
Min. Letter Size: 1*1 mm
Maximum Current: 20mA
Workbench Adjustment: Manual
Laser Class: Class 4(H)
Supported Software: CorelDRAW/AutoCAD/EngraveLab/Adobe Illustrator
Assisted Positioning: Red light
Buffer Memory: 128 MB
System Environment: Windows XP/7/8/10
Data Transmission: USB 2.0 cabte, eihernet cable. USB flash drive
Product Dimensions: 44.1\
Package Dimensions: 48.8\
Color: Red and gray
Workbench Style(s): Honeycomb & aluminum knife
Laser Type: CO2 sealed laser tube
Min.
Character Size: 2*2 mm
Fan: Built-in
Display: LCD digital
Cutting Thickness: 0-10 mm, varying according to materials and power
Resolution Ratio: S4500 dpi
Dichroic Cutting: 256 colors
Protection: Air assist, water cooling system
Included Software: RDWorks 8
Graphic Operating Modes: Optimized raster, vector, and combined
Optional Configuration: Regular rotation axis (not included)
Net Weght: 80kg
Gross Weight: 114kg