Autofocus Laser 50W Co2 Laser Engraving Cutting Machine Engraver Cutter300x500mm

AMERICA Business ALL ITEMS IN STOCK IN AMERICA. AMERICA STANDARD PRODUCTS QUALITY GUARANTEED. Autofocus Laser 50W Co2 Laser Engraving Cutting Machine Engraver Cutter300x500mm. Item was as described and arrived quickly. Laser engraver continues to uphold our previous high standards, TL-A1 control panel(Equipped with laser engraving and cutting software AutoLaser, support CorelDraw, Lightburn, AutoCAD, Illustrator export menu, support custom development), LCD display, large 12x20 inch working area, and pass-through doors that allow even larger pieces to be worked on.

And the running system of our machine is Windows. But if you use the Lightburn, it can compatible with iOS system and Linux. You can transfer the file to the device with a USB memory stick or download it directly from the comput er to the device with a USB cable. Even in the same job, you can set different colors in the software and drill holes. The machine has doors that can be opened to accommodate larger materials. Adjust the workbed up or down from the control panel and the provided sensors will let you automatically adjust the laser beam to compensate. Automatically cuts off the laser beam if the protective cover is opened; and provides an installed air assist to blow debris clear of the laser as it is created. After 3-4 hours of work, there should be a break of about 30 minutes. The honeycomb cutting platform provides stability, noise reduction and heat resistance for smaller items.

The aluminum blade cutting platform provides adjustable height and intense rigidity for larger items like acrylic blocks. FDA compliant laser warning light. A red light indicates that the machine is working and needs to pay attention to safety; A green light indicates that the machine is ready to work.

Front and rear double-pass doors. The worktable can be moved up and down. To fit a variety of engraving materials and products. High Quality Laser Reci Tube.

Using high-quality laser tubes, the tube body is hard and not easily broken. The mode does not change significantly when changing the support point. The life span is extended by more than 30%.

High voltage discharge excites high concentration Co2 gas to produce laser with wavelength of 10.6um. Digital stepping motor subdivision driver.

20cm electric up and down. Blowing flame retardant, water cutting. Windows (if you use the Lightburn, our machine can compatible with iOS system & Linux). USB2.0, network connection, offline U-disk.

960 675 600 mm / 38 27 24 in. 1080 795 800 mm / 43 31 32 in. 60 kg / 132 lbs.

Simplified Chinese, English, Traditional Chinese, Korean, Russian, Italian, Spanish, Portuguese, Vietnamese. The TL-A1 is a motion control system for small laser engraving and cutting machines, based on 2.4 color screen design, with more optimized space design. Support 3-axis motion control and 1-way laser control, equipped with laser engraving and cutting software. Export menu, support custom development. Ful Reci T2 Laser Tube. Laser tube provides 50W of power for up to 3000 hours. Reads flash drives while the other connects directly to your PC via dedicated cable. The Ethernet port allows you to. Gives you plenty of space to work on wood, rubber, plastic, paper, fabric, leather, c. Eramics, tile, fiberglass, marble, stone, and more-even before you open the integrated pass-through doors that permit you to work on even larger pieces!

Engrave or cut almost all non-metallic materials. Supports USB2.0, offline U-Disk and WIFI to transfer data. A large, fully transparent acrylic plate observation window. The whole working area and the working process come into view. The power supply is equipped with an LCD display.

The LCD display shows the current and automatically detects errors. When problems occur, you can troubleshoot according to the instructions. The power supply and motherboard of our machine are installed separately to effectively avoid magnetic interference.

The performance of the machine can be kept optimal. Built-in air support function and.

No additional installation required, simplifies installation. Gases and heat in the working area. Making engraving and cutting always efficient and accurate. The speed, power and other settings can be adjusted through the control panel. With the raster graphic/color vector assignment system. You can adjust the engraving speed and power by color coding.

Reinforced and more robust machine housing ensures safe transportation and longer service life. A red dot pointer mounted on the laser head quickly indicates engraving points, marks the machine's path, and identifies positioning sizes, allowing an effortless project setup process. A pre-installed air compressor guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping your workbed cleaner and engravings more precise. The widened viewing window is made from. To ensure lasting safe use.

The laser automatically stops engraving, cutting, or marking when the workbed's cover is opened for your safety. Close the cover and press Start to resume your work. The water cut protection system protects the laser tube from being burned out.

If the water cooling system fails suddenly, the temperature of the laser tube will rise. At this moment, the water protection system will immediately cut off the power supply to the laser tube to prevent the laser tube from being burned out. The E-Stop safety button immediately stops the machine in case of emergency. Tool lets you quickly correct the focus of your laser directly from the control panel without any need to bother with troublesome acrylic tools and tedious manual adjustment.

Your kind consideration is highly appreciated. F you do not like the goods and would like to return them to us, please see below. Before returning the goods to us, please tell us first. Please return the goods to us within 7 days after you have received the goods.

Please confirm the goods as original packing. Ut please do not forget to send us some clear photos. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products.

We benchmark our products against high standards and that's why our customers keep coming back. After you have ordered, you must pa.