Upgraded Compression Spot Technology: The laser module adopts 4-fold lens group collimation and focus technology, compress 5.5W laser power into 0.060.06mm focus area. The high-density laser can easily cut 15mm light wooden boards, 12mm black acrylic; can engrave stainless steel metal and ceramics.Offline Engraving Control Panel: The laser engraver has a built-in 32bit motherboard supports offline working. The touch terminal control panel can adjust position and alignment, and read engraving files in SD card.
High-Performance Fixed-Focus Laser: The power of fixed-focus laser is more stable than zoom lasers, helps you get a more precise outcome. On the other hand, you don't need to do any complicated adjustment for the focus length before engraving, simply place a card between the laser and surface and that must be the perfect position. New filter eye protection acrylic design: The filter acrylic protective cover plays a good r. Ole in protecting your eyes, filtering 97% of ultraviolet light, you and the people around you do not need to wear goggles, you can also watch laser engraving. Reduce your goggle expense and the inconvenience of wearing goggles.Wide compatibility: The machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP/Win 7/Win 8/Win 10, and also support MAC system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc. ATOMSTACK A5 M50 Pro Laser Engraver for Wood Acrylic Metal 40W Precise DIY Laser Engraving/Wood Acrylic Laser Cutting. Configure the terminal control panel, support offline engraving. With HD touch screen operation, you can set engraving and cutting parameters to increase work efficiency. You can carry out engraving work anytime and anywhere without being restricted by the computer. The flame-retardant filter panoramic glass can filter 97% of the ultraviolet light, which plays a very good role in protecting your eyes. You and people around do not need to wear goggles, you can also clearly watch laser engraving. ATOMSTACK laser engraving machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP/Win 7/Win 8/Win 10 and also support MAC system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF, etc. Modular design of the body mechanism, only replace the frame components, you can get 410850 mm larger engraving size. (Extension kit is not included in the package). ATOMSTACK A5 M50 pro Parts List. 2 Support beam, 1 Y-axis right slide rail, 1 Y-axis left slide rail, 1 X-axis rail, 3 Foot bracket, 1 Laser head, 1 Connecting plate, 1 control box, 1 Display screen, 1 Power Adapter, 1 Power cable, 1 Synchronous belt, 1 Metal mat board, 1 Product Manual, 1 Fixed focus film, 1 Mounting screws, 3 Wood chips, 3 Acrylic sheet, 1 HDMI cable, 1 USB card and card reader, 1 Toolkit, 1 Wire tie, 1 Brush, 1 USB cable, 1 Dust-free cloth. ATOMSTACK A5 M50 Pro Product Description. 40W, Input Voltage: AC100-240V, 50/60Hz, Output Voltage: DC12V, 5A.
410400mm, Input Format: NC, BMP, JPG, PNG, DXF(only LightBurn), etc. 5W-6W, Focusing method: fixed focus laser, no need to focus, Laser protective cover: Protect the user's eyes and prevent pets from grabbing the laser spot.Laser GRBL, LightBurn, with Win XP/Win7/Win 8/Win10/Win 11 and Mac system(LightBurn). 3.5 inch HD screenTouch operation;Engraving groups can be built, and multiple machines can work at the same time; Ergonomic design. Wood, bamboo, cardboard, plastic, leather, PCB board, aluminum oxide, non-reflective Electroplating layer and paint surface layer metal, 304 mirror stainless steel, glass, ceramics, cotton cloth, slate. Cardboard, non-woven fabric, wood board, acrylic, some thin plastic board, sponge. Emergency stop button; Stopper, Reset switch; The laser sintering temperature is up to 900? Replace the frame components, Expandable engraving size to 410850mm.
Q: How long does it take to assemble? A: 5-15 minutes (Depends on your preparation). Q: Which engraving software is supported? A: LaserGrbl (Free) (Win XP, Win 7, Win 8, Win 10, Win 11). LightBurn (Paid-30 Day Free Trial) (Mac OS, Linux, Win XP, Win 7, Win 8, Win 10, Win 11).Q: What materials can be engraved? A: Metal, Glass, Ceramic, Wood, plastic (opaque), cloth, leather and other materials that can be burned by laser. Q: Can I engrave metal and stainless steel? A: You can mark the metal after plating or spraying (acting on the coating or oxide layer), stainless steel the effect is better after the stainless steel is painted black.
Note: It is not engraving, but discoloration. Q: How many hours can Atomstack Laser Engraving Machine work continuously? A: 24 hours (In a well-ventilated environment). Q: Can the laser module be replaced? A: Yes, but the Laser Module input voltage needs to support 12V.Q: Is it possible to engrave cylindrical surfaces? This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "fitgenics" and is located in this country: US. This item can be shipped to United States.