ATOMSTACK A5 M30 Laser Engraver DIY Engraving Cuting Machine 410400mm US B1G7

The laser protective cover perfectly protect your eyes, filter UV light for 97%. You can watch laser engraving without wearing goggles. It is more convenient and quick to adjust the height of the laser. Solid and Quick Assembly Structure Design? The full-metal structure design makes the machine more solid, and improves the accuracy of engraving.

The entire structure has been designed for quick assembly within 10-20 minutes. There are precise scale lines on the X-axis and Y-axis to facilitate quick length measurement. 410x400mm large area engraving interval can meet your various engraving needs. Integrated Stepper Motor and Shaft? The machine uses an integral screw rod instead of a combined coupling. The stepping motor and the screw rod are integrated, which makes the laser movement more precise and the coupling more durable. Upgraded high-performance fixed-focus laser: no need to adjust the focus before engraving; the new laser focal spot is 50% smaller than other ordinary lasers, Compared with ATOM STACK A5 20W laser, the laser power of up to 5.5W.

The machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, and also support MAC system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc. Specification: Main Material: Aluminum Alloy, Metal Print Size: Recommend Print Size 410400mm Laser Power: 30w Laser Output Power: 5W-5.5W Wave Length: 445±5nm Engraving Accuracy: 0.01mm Operating Software: Lasergrbl, Lightburn, Support Win XP /Win 7/Win 8/Xp/Win 10 System Input Format: NC, BMP, IPG, PNG, DXF, etc. Data Transmission Method: Usb Connection Input Voltage: AC100-240V, 50/60HZ Output Voltage: DC12V, 5A Equipment Net Weight: 4.0kg Equipment Size: 570600270mm Packing Size: 59x35x3cm/23.2x13.7x1.1in Package Weight: 5.6kg/12.3lb. Note: · When operating the laser engraving machine, please install the laser protective cover. If it is not installed, you need to wear goggles.

· Please do not touch the laser emitter with your hand, or it may burn your hand. · Please avoid strong impact on the machine. · Children under 14 are not allowed to use this product and children over 14 need adult supervision. · The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser. Packing List: 1 x X-axis Assembly 2 x Section 57CM 2 x Section 48CM 1 x Control Box 3 x Support Legs 1 x Goggles 1 x Laser 1 x 24V 2A Power Adapter 1 x Power Switch Line 1 x USB Cable Step 15 Installation Package 1 x M5 Wrench 10 x Rolled Belt 3 x Small Wood 1 x Focal Length Film 1 x M3 Wwrench 1 x Marker 1 x Brush 3 x small Acrylic 1 x Stainless Steel Backing Plate for Cutting.

This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "yoyomater" and is located in this country: US. This item can be shipped to United States.

Main Material: Aluminum Alloy, Metal
Print Size: Recommend Print Size 410*400mm
Laser Power: 30w
Laser Output Power: 5W-5.5W
Wave Length: 445±5nm
Engraving Accuracy: 0.01mm
Operating Software: Lasergrbl, Lightburn, Support Win XP /Win 7/Win 8/Xp/Win...
Input Format: NC, BMP, IPG, PNG, DXF, etc.
Data Transmission Method: Usb Connection
Input Voltage: AC100-240V, 50/60HZ
Output Voltage: DC12V, 5A
Equipment Net Weight: 4.0kg
Equipment Size: 570*600*270mm
Packing Size: 59x35x3cm/23.2x13.7x1.1in
Package Weight: 5.6kg/12.3lb
Brand: Unbranded/Generic
ASIN: B09Y4BTYD3