80W Laser Cutter Module Head with Air Assist for CNC Engraving Cutting Machine

24V 20W Optical Power 4 Diode Laser For DIY Laser Engraver Cutter CNC Machine. 80W Laser Head With Air Assist 450nm TTL Module for CNC Laser Cutting Engraving. 40W 80W Laser Module 450nm Engraving Laser Head Metal Wood Acrylic Engraving. 40W Laser Module 450nm for Laser Engraving Machine CNC Router Cutting Machine. 40W Laser Module 450nm Engraver Laser Head Engraving For Laser Engraver Machine. 40W Laser Head Air Pump 450nm Blue Laser TTL Module for CNC Engraving Machine. 80W Laser Module Head Kit Laser Head 445nm Engraving Cutting Machine 12V. 12/24V 405nm Blue Violet Laser Module Laser Head For CNC Laser Engraving Machine. Laser module 2.5W/3.5W/5.5W 450nm 33mm Adjust Focus Blue Laser Engraving TTL/PWM. 500mW 405nm Focusable Blue Laser Module Laser Engraving Cutting TTL PWM control. Air assist system: When performing laser cutting jobs, an air assist system blows air through the air nozzle, enhancing the cutting performance and reducing the burn marks. You can remove the air assist nozzle when you are doing non-cutter jobs. This laser kit only comes with an air assist nozzle, to make full use of the air assist feature, you may need to prepare an air assist pump and air tubing yourself.

Laser protective cover: It can effectively filter blue light and can work without wearing goggles. Directly engrave mirror stainless steel: no need painting black.

Super fast engraving speed: 304 stainless steel, up to 30mm/s with 45mm focus length. Remarkable cutting ability: cutting through 8-10mm thickness plywood by one pass at speed of 1.5mm/s. Original diode, high quality, 20,000 hours lifetime! Wavelength: 450nm, Input: DC 12V 3.2A, Support 5V PWM modulation, Input port: XH2.54-3P socket, control line installation method: pluggable.

Suitable for DIY engraving machine. Ceramics, Bone, MDF, Coated glass, Black acrylic, Plywood, Brushed stainless steel, Stone, Bamboo, Leather, Rubber, Alumina, Solid wood, etc. Unable to engrave: blue/purple/white/transparent material, aluminum without oxide layer. Laser Type: semiconductor blue light. 40W actual output power:6-7W (Label shows standard output power).

80W actual output power:10-11W (Label shows standard output power). Drive mode: External ACC constant current drive. Power Control: PWM/TTL (voltage 0-5V). Cable: 3 pin, Red "+" Black "-" Yellow "PWM". Beam Shape: Dot-shaped fixed focus(It comes with a Focusing column 40mm, then when you make the laser work, please confirm the distance from lens to material is 40mm). The life span is 20000 hours.

Due to the different engraving materials, the smoke produced by engraving will adhere to the lens. To avoid affecting the engraving effect, it is recommended to use a fan. You can contact customer service to get it after placing an order. 40w maximum cutting 15mm pine board. 80w maximum cutting 20mm pine board.

The above test data is 240mm/min, 100% power, multiple cutting. Need to match air pump and honeycomb panel. The specific results will vary depending on the density and material of the plank. Sometimes take longer in some remote city. These items are 100% Brand New.

We do our best to serve our customers the best that we can. Our aim is to provide Top Level Customer Service, so we will try our best to solve any problem.

Monday-Friday Beijing Time 8:30A. We will reply to you within 24 hours.