63 x 40 Inches Double CO2 Laser Tube CAMFive Laser Cutter & Engraver CMA6340T

CAMFIVE LASER CMA6340T CUTTER & ENGRAVER - DOUBLE CO2 TUBE HEAD - OPTIONAL SUPPORT BRACKET FOR FULL SHEET. The Way to be more productive. CAMFive Laser CMA6340T is specially designed to. CAMFive Laser CO2 Cutter and Engraver Machine Double Tube Head Industrial Design Model CMA6348T Working Area 63x40 Inches for Cutting and Engraving is specially designed to handle high volume production. Thanks to this machines substantial work area, you can work with large-sized sheets of materials using almost the whole workable area or having 2 laser heads working at the same time.

It is also designed with a pass-through in the back to fit longer materials without having to previously cut them. It is designed with our industrial-grade system. It is able to cut and/or engrave wood, MDF, acrylic, fabrics, leather, glass, rubber, stone, marble, anodized aluminum, etc. Works 24 hours a day! Our lasers have been built under our CNC (Computerized Numerical Control) standards & tolerances, using strict manufacturing processes that guarantee maximum stability and minimum wear and tear of its components throughout its lifetime.

Our machines can operate 24/7. It offers a stable and precise drive system with a Japanese brand displacement axle and accurate and fast step driving motors. The optical system has an American brand lens that has been optimized for outstanding performance during cutting and engraving on different materials. TWO LASER HEADS ARE BETTER THAN ONE.

You can work with large-sized sheets of materials using almost. The whole workable area or having 2 laser heads working at the same time.

It is also designed with a pass-through in. The back to fit longer materials without. Having to previously cut them. LASER TUBE: 2 x 80w STD model (Double) - Available upgrade to PRO 100w, PRO 130w or PRO 150w. CAMFive Laser manufactures 3 categories of CO2 laser tubes: ECO, STD and PRO. They are manufactured with tempered glass and tested at high pressure with helium to prevent any manufacturing defects. Choosing the right tube: If you are looking to do engraving only, a lower wattage tube would be better. However, if you are looking to cut and want a faster speed, the high wattage tubes are the best. Another factor to be considered will be how many hours will you be using the machine in order to determine how often you will need to replace the tube, since the life span varies depending on the category you choose: ECO: Approx. 2,000-4,000 working hours STD: Approx. 5,000-7,000 working hours PRO: Approx. 9,000-11,000 working hours.

WORKING AREA: 63 x 48 Inches. FRAME DESIGN: High volume production (OPTIONAL SUPPORT BRACKET FOR FULL SHEET). WORKTABLE OPTIONS: Removable honeycomb work table. Recommended when you want to engrave any material or if you want to cut fabric, cardboard, paper, rubber, felt or other types of soft and thin material, also when you cut small pieces.

Aluminum Knife Slats tables with removable strips are also available for an additional charge. Recommended when cutting acrylic or wood to avoid the laser bounce back effect. CYCLE DUTTY: Our machines can operate 24/7 with minimum downtime, just for periodic scheduled maintenance, depending on the frequency of use, demand of workload, and materials being used. GERMAN DESIGN OPTICAL LENS: The machine comes standard with a 50 mm focal distance lens made with German technology, optimizes laser beam allowing it to produce fine cuts or deep engravings, depending on your requirements. Also available 75 and 100 mm focal distance lenses for other applications. Our 50 mm focal distance lens made with German technology, optimizes laser beam allowing it to produce fine cuts or deep engravings, depending on your requirements. LASER HEAD X-Y AXIS POSITIONING SYSTEM AND JAPANESE MOTORS: Its Laser Head positioning system is fast and extremely accurate thanks to its high-quality components.

The electronic controller motors are made in Japan to ensure maximum precision, reliability, and performance. Very dependable and maintenance free.

LCD MULTILANGUAGE OPERATING PANEL: User-friendly multilingual LCD Control Panel is incorporated as well as Potentiometers to regulate the laser output power, laser beam on/off button and keyed Security Lock-out switch. LASER BEAM TRACING SYSTEM RED DOT POINT: The red dot pointer helps as a reference to check where the laser beam will land on to your material by tracing a simulation of your design without activating the laser. As well as your starting point. (Ask your advisor if included with your system). USB INTERFACE CONEXION PORTS: USB connection panel.

The machine comes with a USB input port for flash drives that allows you to load files into the internal memory and USB/Printer port (connection cable included) to connect it directly to a PC. SAFETY FEATURES SUCH AS DOOR SENSORS, EMERGENCY STOP BUTTON: Door sensors to stop the laser beam automatically. Our laser machines are equipped with security sensors and safety features disabling the equipment in case of inappropriate use or unsafe operational conditions. Emergency Stop Button gives the machine operator the ability to IMMEDIATELY and completely shut down the entire machine in case of a problem or any event.

The safety turn on Key feature prevents an unauthorized use or operation of the laser machine, allowing only approved operators and/or trained personnel responsible for the operation and maintenance of the equipment. CONTROL SOFTWARE AND INTERFACE: The control software manages various parameters such as power, speed, and resolution in order to achieve the desired results.

It is capable of engraving vector and picture files directly. This software is compatible with a large variety of design programs Such as Corel Draw. Illustrator, Photoshop, Autocad, Wilcom and more.

COMPATIBLE FILE FORMAT: Supports almost all the design and picture formats such as, bmp, gif, jpg, ai, oux, cut, dsb, dst, dxf, emd, nc, out, plt, smc and more. AIR ASSIST SYSTEM (Optional): The Air Assist System includes a compressor that helps to supply air clearing smoke & debris from the work area, cool and protect the Laser Head focusing lens, diminish the amount of flaming, scorching, charring from the workpiece, and reduce the chances of ignition when it is working with flammable materials. An air valve to regulate the air flow is also included. This gives you the versatility to get the best quality of any material you cut or engrave.

ELECTRONIC WATER CHILLER UNIT (Optional): the electronic water chiller helps to regulate the laser tube temperature while in operation by keeping the water at room temperature. This is a highly efficient unit that requires minimum maintains. FUME EXTRACTION SYSTEM (Optional): Various materials release small amounts of fumes and gases in the engraving or cutting process. To extract these fumes and gases, our CAMFive comes equipped with an exhaust system and 12 feet (4 meters) of flexible ventilation duct tubing to be installed when the machine is being operated inside a small and enclosed area. (Ask you advisor if included with your system).

VOLTAGE REGULATOR (Optional): A 2000 VA, 3000 VA or 5000 VA (depending on the model you choose) voltage regulator is provided to protect the laser machines electrical components and sensitive electronics. MANUALS AND INSTRUCTIONAL VIDEOS: An Installation, Operation and Maintenance Manuals and instructional videos that contains clear explanations of the Installation process and the usage of the software, the control panel and other features.

2 x 80w STD model (Double). The machine comes standard with a 50 mm focal distance lens made with German technology, optimizes laser beam allowing it to produce fine cuts or deep engravings. ALUMINUM KNIFE SLATS TABLES WITH REMOVABLE STRIPS.

Available for an additional Charge. LASER HEAD X-Y AXIS POSITIONING SYSTEM. Its Laser Head positioning system is fast and extremely accurate thanks to its high-quality components. User-friendly multilingual LCD Control Panel is incorporated as well as Potentiometers to regulate the laser output power, laser beam on/off button and keyed Security Lock-out switch. The red dot pointer helps as a reference to check where the laser beam will land on to your material by tracing a simulation of your design without activating the laser. The Air Assist System includes a compressor that helps to supply air clearing smoke & debris from the work area, cool and protect the Laser Head focusing lens, diminish the amount of flaming, scorching, charring from the workpiece, and reduce the chances of ignition when it is working with flammable materials.

Various materials release small amounts of fumes and gases in the engraving or cutting process. The electronic water chiller helps to regulate the laser tube temperature while in operation by keeping the water at room temperature. A 2000 VA, 3000 VA or 5000 VA (depending on the model you choose) voltage regulator is provided to protect the laser machines electrical components and sensitive electronics.

SUPPORT BRACKETS TO HANDLE FULL SHEETS OF MATERIAL. TWO DAYS ON-SITE FULL PACK INSTALLATION AND TRAINING. See our machines in action. You have Thirty (30) Full Days to test drive any CAMFive Laser machine. CAMFive Laser CMA6348T is specially designed to handle high volume production.

Thanks to this machine's substantial work area, you can work with large-sized sheets of materials using almost the whole workable area or having 2 laser heads working at the same time. Works 24 hours a day! LASER CUTTER & ENGRAVER DETAILS & MACHINE SPECIAL FEATURES: LASER TUBE: 2 x 80w STD model (Double) - Available upgrade to PRO 100w, PRO 130w or PRO 150w.

GERMAN LASER HEAD X-Y AXIS POSITIONING SYSTEM AND JAPANESE MOTORS: Its Laser Head positioning system is fast and extremely accurate thanks to its high-quality components. Its Stainless Steel Gantry rails and laser head movement system is produced in Germany and its electronic controller motors are made in Japan to ensure maximum precision, reliability, and performance. LASER BEAM TRACING SYSTEM - RED DOT POINT: The red dot pointer helps as a reference to check where the laser beam will land on to your material by tracing a simulation of your design without activating the laser. (Ask your, advisor, if included with your system). "USB" INTERFACE CONEXION PORTS: USB connection panel. This gives you the versatility to get the best quality of any material you cut or engrave.. VOLTAGE REGULATOR (Optional): A 2000 VA, 3000 VA or 5000 VA (depending on the model you choose) voltage regulator is provided to protect the laser machine's electrical components and sensitive electronics. DESCRIPTION OF OUR LASER CUTTING & ENGRAVING MACHINE. CAMFive Laser CO2 Cutter and Engraver Machine Double Tube Head Industrial Design Model CMA6348T Working Area 63x48 Inches for Cutting and Engraving is specially designed to handle high volume production.

LASER CUTTER & ENGRAVER DETAILS & MACHINE SPECIAL FEATURES. 2 x 80w STD model (Double) - Available upgrade to PRO 100w, PRO 130w or PRO 150w. (OPTIONAL SUPPORT BRACKET FOR FULL SHEET). Our machines can operate 24/7 with minimum downtime, just for periodic scheduled maintenance, depending on the frequency of use, demand of workload, and materials being used.

The machine comes standard with a 50 mm focal distance lens made with German technology, optimizes laser beam allowing it to produce fine cuts or deep engravings, depending on your requirements. GERMAN LASER HEAD X-Y AXIS POSITIONING SYSTEM AND JAPANESE MOTORS. LASER BEAM TRACING SYSTEM RED DOT POINT.

SAFETY FEATURES SUCH AS DOOR SENSORS, EMERGENCY STOP BUTTON. Door sensors to stop the laser beam automatically. The control software manages various parameters such as power, speed, and resolution in order to achieve the desired results.

Supports almost all the design and picture formats such as, bmp, gif, jpg, ai, oux, cut, dsb, dst, dxf, emd, nc, out, plt, smc and more. ELECTRONIC WATER CHILLER UNIT (Optional).

2000 VA, 3000 VA or 5000 VA (depending on the model you choose) voltage regulator is provided to protect the laser machines electrical components and sensitive electronics. An Installation, Operation and Maintenance Manuals and instructional videos that contains clear explanations of the Installation process and the usage of the software, the control panel and other features.

The item "63 x 40 Inches Double CO2 Laser Tube CAMFive Laser Cutter & Engraver CMA6340T" is in sale since Wednesday, June 22, 2016. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Woodworking Equipment\Routers". The seller is "camfiveusa" and is located in La Puente, California. This item can be shipped to United States.

• Model: CMA6348T Large Cutter & Engraver
• Machine Type: Cutting & Engraving Machine
• Power Source: Electric
• MPN: Does Not Apply
• Brand: CAMFive Laser
• Control: Automatic