130W Laser Engraver CO2 Laser Engraving Cutting Cutter Machine 35x55 US

OMTech's 20W fiber laser engraver is your ultimate resource for engraving words, logos, pictures, barcodes, and more on metal including personalized gold and silver jewelry! And other materials with quick turnaround and perfect accuracy.

Our device's state-of-the-art air-cooled fiber laser avoids the tetchiness, fragility, and water-based mess of CO2 laser tubes. Instead, it provides solid-state efficiency, quality, stability, and durability for its entire service life of 100,000 hours.

The Sino-Galvo galvanometric system and compact F? Field lens ensure quick work with less than 1% distortion from your design. The built-in red dot locators allow you to precisely adjust the height of the laser arm to quickly find the exact focus for various materials. With the optional rotary axis, you are able to mark on curved surfaces. The machine is controlled by its included copy of EzCad2, compatible with Windows 7, 8, and 10.

For all your projects marking and cutting metal, rubber, leather, and more, you can do no better. NOTE that this device has an open worktable.

It comes with one pair of protective eyewear but anyone else in the room with the device should also have their own laser glasses to avoid any possibility of injury from its beam. Get the most out of your laser engraving equipment with OMTech!

Acrylic, Hard Plastics, Brick, Granite, Marble, Tile, Aluminum, Gold, Silver, Stainless Steel, Brass, Titanium, Tungsten. Enjoy stable dependable operation with an MTTF over 100,000 hours thanks to this engraver's solid-state laser source. Its 1064 nm wavelength provides exceptional metal marking, with a 65 µm spot able to engrave with smooth and delicate edging, minimal additional processing, and no waste of materials. The laser arm's Sino-Galvo drive and scanning system provides outstanding accuracy and works with the F? Lens to produce both fast and stable marking of flat surfaces at speeds as fast as 275.6 inches per second (7000 mm/s).

Lens creates vivid markings on flat surfaces by maintaining a consistent, focused laser spot size across its 4.3? Producing less than 1% distortion, it flawlessly executes intricate designs with unbelievable precision. The dependable Beijing JCZ Tech control board organizes all of the aspects of this long-lasting multifunctional fiber laser marker and keeps them humming along. The workbed is compact and lightweight with a simple interface.

The built-in grid allows convenient and safe adjustment of the laser's position. Its M5 holes can be fitted with positioning bars to keep your material just where you need it. Your EzCad2-based fiber laser engraver works with LightBurn's latest galvo functionality on Windows, MacOS, and Linux systems to let you create even the most intricate patterns easily. Visible laser pointers let you focus the invisible marking ray quickly and easily.

The scanning lens also provides a clear, safe red light preview of your pattern's outline for convenient positioning. Your fiber laser comes with a bundled edition of EzCad2 engraving software compatible with Windows XP, Vista, 7, 8, and 10 and a wide range of graphics formats. Create marking magic at the push of a button!

Our engraver comes with built-in support for standard rotary axes (not included) with 4-pin connectors. Enjoy plug and play engraving of rings, bracelets, cups, tubes, and other cylindrical surfaces. Separately grounded for your safety, the scanner, laser source, and rotary axis have separate power buttons.

The access key precludes any unauthorized use of your laser, and the circuit breaker is ready in case of emergencies. For even greater protection, this transparent acrylic cover can be purchesed separately, with its sepia tint filtering out engraving laser wavelength and protecting you and bystanders.

The built-in interlock will automatically kill the laser when the cover is opened. A pair of OD4 laser glasses come included to protect your eyes from the 1064 nm beam of this laser, as well as offering protection from other alexandrite, diode, and neodymium (Nd:YAG) lasers. Marking Area: 4.3×4.3 in.

Compatible Image Software: AutoCAD, CorelDraw, Illustrator, Photoshop, etc. Expected Service Life: 100,000 hr. Marking Depth(Depend on material): 0.002 in. Marking Speed: 275.6 ips (7000 mm/s).

Positioning Accuracy: ±0.1 µm. Compatible Materials: All Metals & Some Non-Metal Materials such as Leather, Hard Plastics, etc. 1 x 20 Watt Fiber Laser Marking Machine.

1 x USB Flash Drive (with Software). 1 x Hex Wrench Set. If the weight of your order exceeds 150 lbs. Special circumstances will be listed clearly in the listing.

Please do check everything carefully after you received the parcel, any damage except DOA (Dead-On-Arrival) would not be covered if it's your fault. Our 30-day Satisfaction Guarantee assures our customers that they will receive all orders promptly and exactly as described. Parts must be resaleable and in the original packaging. We cannot take back used products. We cannot take back installed or tired products.

We do reserve the right to refuse and return any parts we find have been installed, are used or do not meet the above criteria. Return request need to be within 30 days of receipt. OMTech is a collaboration of 30-yr industry vets and promising new techs in Anaheim, California.

Our affordable but quality lasers and US-based support quickly grew us into the largest online brand for precision engraving. Alongside our skilled & helpful staff, OMTech users have built up a supportive online family in our forums and social media, sharing inspiration and sharpening their DIY skills together. We love keeping the OMTech family on the cutting edge of laser crafting because we know our growth is inseparable from your success.

All emails will be responded to within 12-24 hours. One 45-minute Virtual Tech Support appointment with OMTech Specialists in Anaheim, California. This 130W CO2 laser engraver can improve the engraving efficiency, make the surface of the engraved part smooth and round, reduce the temperature of the engraved metal material quickly, and reduce the deformation and internal stress of the engraved object. This machine is a laser engraving mesh system with CO2 laser tube, engraving wood, bamboo, plexiglass, crystal, leather, rubber, marble, ceramic and glass. The most suitable and preferred equipment for advertising, gifts, shoes, toys and other industries.

A large, fully transparent acrylic plate observation window. The whole working area and working process come into view.

A red dot pointer indicates the precise position of the engraving. The starting point of the laser can be clearly seen once the power supply is connected. With the raster graphic/color vector assignment system, you can adjust the engraving speed and power by color coding. Supports multiple graphic formats (All formats recognized by CORELDRAW and AUTOCAD) such as HPGL, BMP, GIF, JPG, JPEG, DXF, DST, AI, etc.

Our 130W laser power supply delivers excellent performance with high efficiency and fast response times. Increase the service life and get the most out of your laser tube with our safe, stable, and capable power supply. Built-in air support function and exhaust fan, no additional installation required, simplifies installation. They help to clean the dirt, gases and heat in the working area, making engraving and cutting always efficient and accurate.

The 1400 x 900 mm(55 x 35 in) workbed provides about 13 square foot of room to fit all your projects, whether personalized gifts for friends and family or custom orders for new clients. The industrial-grade laser head delivers a stable laser beam over the long service life of the machine, while maintaining supreme accuracy and performance. Open cover protection--The laser automatically stops engraving or marking when the workbed's cover is opened for your safety.

Close the cover and press Start to resume your work. Water cut protection--The water interruption protection system protects the laser tube from burning out. If the water cooling system suddenly fails, the temperature of the laser tube will rise.

At this moment, the water interruption protection system immediately cuts off the power supply to the laser tube to prevent the laser tube from burning out. Our digital control panel's LCD display offers clear monitoring of the tube's temperature and easy adjustment during use. The helpful E-stop button brings everything to an immediate stop when needed.

If you do not like the goods and would like to return them to us, please see below. Before returning the goods to us, please tell us first. Please return the goods to us within 7 days after you have received the goods. Please confirm the goods as original packing. Ut please do not forget to send us some clear photos. Your kind consideration is highly appreciated. After you have ordered, you must pa.