110V Industrial Water Chiller CW-3000 for CNC/ Laser Engraver Engraving Machines

100pcs DIY Natural Skin Care Compressed Cotton Facial Face Mask Sheet New. High Quality Brush Cleaner Dirt Remover Dust Daddy Universal Vacuum Attachments. Block Nail File Polishing Practical Tools Grinding Block 5 Pieces Manicur Buffr.

10pcs 3.17mm Steel Screw Mandrel Arbor Shank Cut-off Wheel Holder Shaft. 5 x Connector Led Stripe RGB 4 Pin Pole Clip Connector Quick Connector Strip top. CONCENTRATOR GENERATOR HOME/TRAVEL/CAR GENUINE EGET AIR BATTERY WITH PORTABLE. 110V Industrial Water Chiller CW-3000 for CNC/ Laser Engraver Engraving Machines. It is designed for cooling the one CO2 glass laser tube under 80W of the laser engraving and cutting machine.

Comprehensive reference to the international radiator - type cooling system. With completed water flow and over high temperature alarm functions. Professional forced air - cooled radiator. Equipped with alarm output port. Current: 0.9A (AC100 - 120V). Amount of Cooling: 50W /. Way of Circulation: Water pump forces circulation. Maximum Flow: 18L / min. Inlet and Outlet: External Dia.

CW-3000 laser water chiller is suitable for small water cooling device. Provide stable working conditions for laser devices.

Water can be used for a long time. High heat dissipating capacity and not easy to be blocked. Alarm output port can quickly protect sensitive components. Specific disconnection alarm securing protection.

High cost performance, low failure rate. Cool Capacity is 50W /. Forces circulation, 8L cooling tank capacity. It can extend the using life of laser tube and ensure the engraving effect better. Industrial cooling machines installation is very simple, the new machine for the first time using, you can install it as following steps. Open the package and check the machine and all accessories. Open the mouth screw on the top of machine, add cooling water (Please dont power the machine without water). Connect the inlet and outlet hose between water cooler and laser engraving machine. Connect the power cable, turn the power switch (Note: Dont let the water overflow). Check the radiator water level again (Keep the distance between water level and mouth is 80 150mm). Cooling machine used in long term, you should open the machine and clean the dust in order to ensure good heat dissipation.

You can use non corrosive antifreeze if you are in the northern cold regions. A cooler water condition in the absence of electricity is prohibited! Location placed cooler should select a well - ventilated, dry environment, away from other heat sources.

Outlet of the back of the cooler should be away from obstruction for more than 30cm, both sides of the inlet should be away from obstructions for more than 10cm. Cooling machine no use for long time or in transport must keep emptying the cooling water.

CW3000 water chillers are equipped high speed fans inside, NOT able to control the water temperature. To protect the laser tube, cooling fan will suspend the work when the water temperature is low (about 10), and it will continue to work when the water temperature rose to higher (about 20). The appliance is not to be used by children or persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction, children supervised not to play with the appliance! 1 × CW3000 Water Chiller Machine. 1 × Power Line (US Plug). Our company is an emerging professional Cross-Border Electronic company.

So far we have finished the assets re-organization and obtained wholesale financing. We guarantee every product is of high quality and durable utility compared to other factories becayse we choose the best-buys goods. We are really appreciated if you would like to give us your valuable positive comment(s) after you receive our products, which is a huge encouragement for us to make our products and service better and better.

Hope you will love our items. Any questions will be answered promptly, so please feel free to let me know your concern. At present, our company has warehouses in America and NO tariffs. If you are a U. Transport time will range from 2 to 4 workdays according to your location.

Note: American regional AK, HI, PR, are remote areas. These places will be charged.

Please do check everything carefully when receiving the package. Failure to do so might result in damage to your own rights and interests. The item "110V Industrial Water Chiller CW-3000 for CNC/ Laser Engraver Engraving Machines" is in sale since Tuesday, December 12, 2017.

This item is in the category "Business & Industrial\Healthcare, Lab & Dental\Medical & Lab Equipment, Devices\Water Baths, Circulators & Chillers". The seller is "top-mallshopping" and is located in Los Angeles.

This item can be shipped to United States, all countries in continental Asia, Canada, Mexico, Australia.

• Maximum Pumping Lift: 9M
• Power: 99W
• Protection: Flow alarm
• Tank Capacity: 8L
• Voltage: 110V,60HZ
• Model: CW-3000DG
• Country/Region of Manufacture: China
• Amount of Cooling: 50W /
• Current: 0.9A
• Inlet and Outlet: External Dia.: 10mm brass connector
• MPN: MG2019062252
• Brand: TAISHI
• Maximum Flow: 18L / min