EleksMaker EleksLaser-A3 Pro Laser Engraving Machine CNC Laser Printer

EleksMaker EleksLaser-A3 Pro Laser Engraving Machine CNC Laser Printer
EleksMaker EleksLaser-A3 Pro Laser Engraving Machine CNC Laser Printer
EleksMaker EleksLaser-A3 Pro Laser Engraving Machine CNC Laser Printer
EleksMaker EleksLaser-A3 Pro Laser Engraving Machine CNC Laser Printer
EleksMaker EleksLaser-A3 Pro Laser Engraving Machine CNC Laser Printer
EleksMaker EleksLaser-A3 Pro Laser Engraving Machine CNC Laser Printer
EleksMaker EleksLaser-A3 Pro Laser Engraving Machine CNC Laser Printer

EleksMaker EleksLaser-A3 Pro Laser Engraving Machine CNC Laser Printer
EleksMakerĀ® EleksLaser-A3 Pro Laser Engraving Machine CNC Laser Printer. Please use the OFFICIAL software. And DO NOT use Benbox to control EleksMaker A3, which may possibly cause the hardware damage in controller board. This item is a engraving machine frame construction kit, which comes without laser module.

The advantage is that you can add a compatible laser module with various power according to your needs. We recommend the that can perfectly fit and be ready for use. 58x40x14cm / 22.83x15.75x5.51inch (LWH). 60x46x18cm / 23.62x18.11x7.09inch (LWH).

Photo, Word, Scan, outline, Pixel Laser Engraving. T2-Laser, GrblController, LiteFire, Laser GRBL, etc.

30x40cm / 11.81 x 15.75inch (maximum). Official Software EleksCAM Download & Instructions. Please wear laser goggles during usage and avoid touching the laser directly with your eyes and skin! This is a whole assemble set and needs to assemble by your own. Many operative problem can be solved according to your video.

It can effectively save your time and energy if you send the video to us with the problem description. 1 Set x Laser Engraving Machine (Without laser module). How to assemble the kit? What software can support this machine? Supported Software: , T2-Laser, GrblController, LiteFire, Laser GRBL, etc. Supported Image Format: jpg, bmp, svg, G-code Supported Engrave Mode: Photo, Word, Scan, Outline, Pixel Laser Engraving. What system can the EleksCAM support? PC Windows XP/7/8/10 , Laptop is ok, too. My laser doesn't work, what should I do? If the machine does not work, it might because. The wire connection is wrong. Please check the connection like the picture shown. Your computer could not support the software. Please use Win XP 7/8/10 to check it.

Please check whether wires are inserted rightly. The kit misses some accessories. Laser module/ driver board/power supply is broken. Please check which part is the main problem, and then send us a video to prove it. Or you can send us a video about your software setting, working laser and driver board.

We will analyze it and give you a solution. 5: My software shows: Not data, what should I do?

There might be two reasons. You did not open Administrator privileges to run the software. Your computer architecture is incomplete:check whether VC ++ and. Net and directX are installed, and have to turn off the virus. Can I regulate the laser power or the laser power is adjustable?

Our new Mana SE controller board can adjust the power. Please download our ElekesCAM software to do it. Can I upgrade stronger power laser module by myself? Can I extent rail frame? DC12V laser module can be installled on this machine.

You can also extent the frame by yourself, but we do not provide rails. But when I begin to make it work with EleksCAM software, it does not move. The EleksCAM could move by hand but could not move when focus. The probelm is the area and language inside the system control panel. Please set the format to English and United States.

Then it will be ok. Detail is shown in the wiki link above.

If my laser is broken and I might find the reason(Or I could not find). Find the reason: Take a video to prove the part is broken and then send it to us.

We will give you a solution according to your video. Could not find the reason : Check the Question 4 first.

The video should contain software setting, broken part details and the power-on machine. We will solve it asap. Some products have different policies or requirements associated with them.

First, please kindly provide us with proof as below. Photos of the front and back of the packaging envelope or box. Photo, video, screenshot, or description of the defective item. Photo, video, screenshot, or description of the defect or defective area. How to cancel your order.

Just placed an order but changed your mind? Here is the easy way to get your order canceled.

How to cancel an order before it ships. How to cancel pending orders.

When the item arrives reject it when the carrier arrives, or accept it and send it back to us. The item "EleksMaker EleksLaser-A3 Pro Laser Engraving Machine CNC Laser Printer" is in sale since Monday, January 14, 2019. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "e-shippyshop" and is located in Saint Rose, Louisiana.

This item can be shipped to United States.


EleksMaker EleksLaser-A3 Pro Laser Engraving Machine CNC Laser Printer


Home   Sitemap   Contact   Privacy Policy   Terms of Use