DIY Projects Show with EleksLaser. Notice: The upgrade version of the laser module is blue. The former version is black. We will send blue version in CN Warehouse from now on. You might receive the black version in US / AU Warehouse.
Photo, Word, Scan, outline, Pixel Laser Engraving. Candle, EleksCam, T2-Laser, Benbox, GrblController, LiteFire, Laser GRBL, etc. 30x40cm / 11.81 x 15.75inch (maximum).58x40x14cm / 22.83x15.75x5.51inch (LWH). 60x46x18cm / 23.62x18.11x7.09inch (LWH).
Wood, Plastic, Paper, Bamboo, Ox Horn, Leather, Sponge Paper, etc. Metal, Stone, Ceramics, Glass, Reflective or Transparent Material. Ideal for amateur laser engraving usage low-light positioning and freedom positioning functions.
Ultra large engraving area, gantry shape design, no engraving height limitation. Three stepper motor drive providing.
Violet laser module with heatsink, high laser engraving power and long. You can know more about installation, software download, software setting , operating instructions and normal questions through this wiki link. Software download link is here.
The benbox Instruction downloading link is. Please wear laser goggles during usage and avoid touching the laser directly with your eyes and skin!This is a whole disassembled set and needs to assemble by your own. Please note that the laser module should work less than half an hour per time, and then work again after cooling down. If you have any quality problem(Except individual situation like using the laser module more than 30 minute one time and casue the damage), please feel free to ask our customer service for a help. If your laser module has any problem, please. Dismantle it without our permission.
It will destroy the laser module. Many operative problem can be solved according to your video.
It can effectively save your time and energy if you send the video to us with the problem description. How to assemble the kit? What software can support this machine? GrblController, LiteFire, Laser GRBL, etc. Supported Image Format: jpg, bmp, svg, G-code Supported Engrave Mode: Photo, Word, Scan, Outline, Pixel Laser Engraving.
What system can the EleksCAM support? PC Win XP 7/8/10 , Laptop is ok, too. My laser doesn't work, what should I do? If the machine does not work, it might because. Â The wire connection is wrong.
Please check the connection like the picture shown. Â¡ Your computer could not support the software.
Please use Win XP 7/8/10 to check it. Please check whether wires are inserted rightly. Â¤ Laser module/ driver board/power supply is broken. Please check which part is the main problem, and then send us a video to prove it. Or you can send us a video about your software setting, working laser and driver board.We will analyze it and give you a solution. 5: My software shows: Not data, what should I do? There might be two reasons.
Â You did not open Administrator privileges to run the software. Â¡ Your computer architecture is incomplete:check whether VC ++ and. Net and directX are installed, and have to turn off the virus. Can I regulate the laser power or the laser power is adjustable? Our new Mana SE controller board can adjust the power.
Please download our ElekesCAM software and firmware to do it. Or benbox software and benbox firmware. Please note that two firmware is not the same.Details are shown in the EleksCAM & Benbox software instruction above. Can I upgrade stronger power laser module by myself? Can I extent rail frame? DC12V laser module can be installled on this machine. You can also extent the frame by yourself.
But we do not provide rails. But when I begin to make it work with EleksCAM software, it does not move. The EleksCAM could move by hand but could not move when focus. The probelm is the area and language inside the system control panel.Please set the format to English and United States. Then it will be ok. Detail is shown in the wiki link above. My laser module is always on and could not turn off.
Please try to connect the Signal(S) and GND(-). If the laser module turn off, that means the laser module is ok, the problem might be the ManaSE board or software setting. If the laser module is still on, that means the laser module might be damaged. You can check as the video shown.If my laser is broken and I might find the reason(Or I could not find). Find the reason: Take a video to prove the part is broken and then send it to us. We will give you a solution according to your video. Could not find the reason : Check the Question 4 first. If the problem could not be solved, please feel free to contact our customer.
We will solve it asap, please upload the video to any cloud service such as YouTube or google drive and share a link with us. The item "EleksMaker EleksLaser-A3 Pro 2500mW Laser Engraving Machine CNC Laser Printer" is in sale since Saturday, August 13, 2016.This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "kanzezol" and is located in China. This item can be shipped worldwide.