You can do the complex edits in PS / Inkscape / CAD or similar and just burn with the included program. At the same time, it supports NEJE control software and GRBL software, which can not only enjoy the simple portability of NEJE software. But also support the operation fun of GRBL open source software; it supports the dynamic control lase module developed by Neje, which can support PWM power regulation, low light brightness regulation, lase temperature induction protection.4A load current, capable of delivering powerful output power, 15,000 rpm fan and exquisite heatsink design, can keep temperature safe control within 60 degrees Celsius, maximizing protection lase life, no matter how high-intensity you use, no matter how you work how long. PNG files and "NEJE CLOUD" provides thousands of engraving materials and resources to download and keep updating. Standard 450nm 20W lase tube. The Master 20W excels in fast cutting and can cut materials from 3mm to 8mm thickness. 4Pin lase design with temperature sensing and surge protection design can effectively extend the lase life, and the lase interface supports other machines developed by KKmoon.
Compatible with a variety of power lasers, while supporting 4pin 405nm 3500mw, 4pin 450nm 7000mw and 4pin 450nm 20W. Multi-functional keys can support offline work: press 1 time to reset automatically, press 2 times to perform frame positioning, press 3 times to start engraving, press 4 times to stop engraving. Dual MCU: One MCU for Support NEJE Controller(Windows & M AC), The Other for GRBL Controller. Lase Power: 20W (Lase input:12v2A).
Lase W ave Length: 450nm. Image Size: 2000 2000 pixels / 0.075mm point distance.Supported OS: WinXP / Win7 / Win8 / XP / Win10 M ac OS, android APP(neje scanner). Engraving Area: 150mm x 150 mm in Working area; 160mm x 160mm in GRBL Mode. 38 28 13cm / 14.96 11.02 5.12in. 43 27 14.5cm / 16.93 10.63 5.71in. Especially good at cutting, It can cut wood (3-8mm).
It supports metal engraving including alumina oxide, copper and other non-reflective materials, depth of engraving (0.5-3mm wood). Supported engraving materials: Wood, gray paper, leather, bamboo, blackening plastics, rubber, alumina oxide, copper, etc. It is not possible to directly engrave the metal with strong mirror reflectivity, which may cause injury to the operator or burn the lase.When the machine is working, it is recommended not to look directly at the lase head, and not to operate the lase head directly by hand. Lase diode is a sensitive component, pay attention to prevent electrostatic damage (product includes electrostatic protection design, but there is a certain probability of damage). The item "20W Mini Desktop DIY La-ser Engraver Portable Engraving Carving Machine Printer" is in sale since Sunday, September 15, 2019. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "yoyomater" and is located in Shen Zhen. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia.
1400g / 49.39oz