Three stepper motor drive providing faster moving speed. 2.5W violet laser module with heatsink, high laser engraving power and long-term available. It is ideal for amateur laser engraving usage low-light positioning and freedom positioning functions. It only need you to connect it to the computer, then you can print any pictures your like with your own creativity.Advanced Edition(GRBL)/ Simple version(Benbox). 22x17cm / 8.66 x 6.69inch (maximum). 35x25X15cm / 13.78x9.84x5.91inch (LWH). 2.5W / 2500mW DIY Laser Engraving Machine Assembling Kits Lists.
2.5W violet light laser engraving assembling kits No limitation of engraving height Adjustable laser power and burning time Low-light positioning function freedom positioning function USB interface Ideal for amateur DIY laser engraving Tips. The software we have upload it to the netdisk, and its downloading link is. For the laser machine, please feel free to contact our live chat and get it. Can engraving materials: wood, bamboo, plastic, paper, leather, bank card, rubber 2. Can not engraving material: metal, stone, ceramic, shell, light-reflecting material, transparent material.
It can only cut foam, paper, thin leather material. Please wear laser goggles during usage. This the a whole assemble set, it needs you to assemble it. 1x Violet Laser Engraver Assembling Kits.
After Assembling the whole Set Kits: (Finished Product). Q:Does this machine need to be assembled when I received it? A:There is a set of laser machine parts that needs you to assemble by yourselves, but we have introduction video to show you how to assemble it, it is very intersting, and rich information, practical skill then you will get from the DIY. Q:Whick type computer system can run its software?A:The software only support the Windows system. Q:If I received the product but it is broken during the tranportation, What can I do? Q:What' s the machine' s lifetime? A:The machine is made from the aluminum alloy and acrylic. Its lifetime depend on the laser module lifetime. The laser module have over 6,000 hours lifetime. Q:If the laser module is broken during usage, Where can I get the replacement one? Q:What' s the size of this machine' s engraving area? A:The machine' s largest engraving area is 22X17cm. Q:What material can it engrave? A:wood, bamboo, plastic, paper, leather, rubber. Q:What material can it cut? A:foam, paper, thin fabri, thin balsa wood. Q:Can I use it to cut or engrave on metal? A:It can not engrave or cut on any metal. Q:Can I regulate the laser power or the laser power is adjustable? A:Sorry that the laser power is not adjustable, but the engraving speed is adjustable. Q:How long can the machine work continuously?
A:It can work continuously about 60 minutes, after the laser module cool down(about half of an hour), then start work again. Long time work continuously with shorten the laser module lifetime. Q:Can I upgrade the stronger power laser module by myself? A:Of course you can, this machine provide the DC 12V power supply for laser module.So any 12V power supply laser module can be installled on this machine. But you need to connect the laser cable with the right polarity, the red is positive, otherwise the laser mdoule will burn down. Q:Can I extend the slide rail to expand its engraving area?
But you need to find the the slide rail by yourself, we do not provide such extended slide rail. Q:When I receive it, how to let it work?A:Fist of all, you need to plug the stepper moter power cable to the controller board, then installl the software and the driver, power supply the machine, that' s all. A:There are whole set laser module that compatible with the machine, please just input the corresponding laser power(For example:500mW) on our website, then you can will find it. Q:Why the machine can' t connect with PC? A:Please check if the drive was installed.
A:If the port is matched. A:If the USB cable is connected. Q:why the machine can' t run?A:Please check if the power is connected. A:If the switch of power is pressed.
A:If the LED light of power on board is light. A:If the machine is connected with PC.
A:If the machine frame(like wheel, motor and belt) is assembled correctly. A:If the connector of motor is connected with board. Why the laser can' t work. A : Please check if the power is connected.
A:If the machine can work but laser can' t work, please connected the laser with 12V DC power directly, if the fan can work but no light. The laser was burned out. The item "2.5W Desktop DIY Violet Laser Engraver Engraving Machine Picture CNC Printer kit" is in sale since Wednesday, July 06, 2016. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "autodoorstuff" and is located in Shangha.
This item can be shipped worldwide.