Support low light software, software adjust laser power. The laser pulse power can reach 15 w. The maximum engraving it can achieve in an area is 100100cm. It's aluminum material, and acrylic produced. The software is easy to use, with free upgrades for life.It can adjust the laser power through the software. Please wear laser goggles during usage and avoid touching the laser directly with your eyes and skin! This is a whole assembly set and needs to assemble by your own. Please note that the laser module should work less than half an hour per time, and then work again after cooling down. If you have any quality problemExcept individual situation like using the laser. Module more than 30 minute one time and cause the damage, please feel free to ask our customer service for a help. Many operative problem can be solved according.
It can effectively save your time and energy if you send the video to us with the problem description. How to assemble the kit?What software can support this machine? Supported Software: EleksCam, Candle, T2-Laser, Benbox, GrblController, LiteFire, Laser GRBL, etc. Supported Image Format: jpg, bmp, svg, G-code. Supported Engrave Mode: Photo, Word, Scan, Outline, Pixel Laser Engraving. What system can the EleksCAM support? PC Win XP 7/8/10 , Laptop is ok too. My laser doesn't work, what should I do? If the machine does not work, it might because. Laser module/ driver board/motor/power supply is broken. Please check which part is the main problem, and then send us a video to prove it. Or you can send us a video about your software setting, working laser and driver board. We will analyze it and give you a solution. The kit misses some accessories. Please compare with the instruction and tell us, we will send it to you for free. The wire connection is wrong.
Please check the connection like the picture shown. Your computer could not support the software. Please use Win XP 7/8/10 to check it. Please check whether wires are inserted rightly. 5: My software shows: Not data, what should I do?
There might be two reasons. You did not open Administrator privileges to run the software. Your computer architecture is incomplete:check whether VC ++ and.
Net and directX are installed, and have to turn off the virus. Can I regulate the laser power or the laser power is adjustable? Our new Mana SE controller board can adjust the power.
Please download our ElekesCAM software to do it. Can I upgrade stronger power laser module by myself?Can I extent rail frame? DC12V laser module can be installled on this machine. You can also extent the frame by yourself. But we do not provide rails. If my laser is broken and I might find the reason(Or I could not find). Find the reason: Take a video to prove the part is broken and then send it to us. We will give you a solution according to your video. Could not find the reason : Check the Question 4 first. If the problem could not be solved, please feel free to contact our customer. The video should contain software setting, broken part details and the power-on machine. We will solve it asap. Photo, Word, Scan, outline, Pixel Laser Engraving.
100x100cm / 39.37 x 39.37inch (maximum). Wood, Plastic, PCB, Paper, Bamboo, Ox Horn, Leather, Sponge Paper, etc. Metal(7w and 10w can), Stone, Ceramics, Glass, Reflective or Transparent Material. Ideal for amateur laser engraving usage low-light positioning and freedom positioning functions.
Ultra large engraving area, gantry shape design, no engraving height limitation. Three stepper motor drive providing. Violet laser module with heatsink, high laser engraving power and long. The item "15W CNC Laser Engraver Full Metal Marking Machine Wood Cutter 100x100cm DIY Kit" is in sale since Tuesday, November 14, 2017.This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "discountparts_90" and is located in Hong Kong.
This item can be shipped worldwide.