Laser type :CO2 laser engraving machine. Power supply AC :220V(110V country comes a transformer). Cutting depth :0-20 mm (different material differ). Linear Guides weight is heavier than the circular rail.
The accuracy is better, the speed will be slower, the service life will be longer. Laser focal length: 6.35cm. Windows 8, 7 (64 or 32 bit), XP. Locating precision :<0.02 mm.Min shaping character Character: 22mm, Letter: 11mm. Data transfer interface :USB 2.0 (offline). Cooling :Water cooling and protection system with chiller. Protection :Emergency stop button and stop working when water broken.
Graphic Format:AI, DXF, PLT, DST, DSB, EPS, BMP, RDB, GIF, JPG, PNG, MNG, ICO, CUR, TIF, TGA, PCX. WBMP, WMF, EMF, JBG, PGX, RAS, PRUM, SKA, RAW. It is to remove excess heat and combustible gases from the cutting surface. Red dot pointer :Since the laser beam is invisible, since the laser beam is invisible, this function can allow you. Have a visual reference for locating where the laser will fire.71" x 37" x 33. 181 x 94 x 84. Machine package : Wooden box with foam inside. Package dimension :75" x 42" x 41(193 x 109 x 106 cm). Gross weight :286 lbs(130 kg). Package weight :399 lbs(181 kg). CW-5200 chiller package :Carton box with foam inside. Package dimension :27" x 23" x 16(71 x 59 x 41 cm). 80MM rotary axis package : Carton box with foam inside. Package dimension :33" x 13" x 13(84 x 34 x 34 cm). Package weight :33 lbs(15 kg). It is original RECI W6. There are a two-dimensional code and a unique serial number that can be found it's message on the RECI website.
Quality standard is 130w-160w, length is 1650mm, diameter is 80mm. Global famous brand, Quality assurance. RDC644 system is the latest laser engraving & cutting control system developed by Ruida Technology, this.
Control system has better stable hardware with anti static, resistance to high pressure. Based on 3.5-inch colorful screen human-machine operation system, with better operation interface and stronger. Functions, excellent motion control functions, high-capacity file memory, with strong compatible 2-way independent.
Adjustable laser power control interface, strong compatible U disk drive program, multiple ways gerneral/dedicated IO. Flame-retardant function of blowing gas.
High speed, high precision, infinite loop. Low coefficient of friction, low noise. Can put more thick material to work. Don't need to put the machine on a table.Our this machine use CW 5200 chiller, not cw 3000 chiller or water pump. Multiple alarm functions: compressor time-delay protection, compressor over current protection. Water flow alarm and over high / low temperature alarm. Better cooling effect, better protection of laser tube and machine.
Our this machine comes with 80mm rotary axis. Forward Jaw rang:1.5-30mm.
Nt and back directions can be opened, longer materials can be. Placed, and the use of space becomes larger. HL-1060 DSP 130W laser RDworks off-line with high-speed High configuration board.Control system, Imported lens and reflector system. Use USB 2.0 off-line. It supports CAD and RDworks and.
CoreldRAW software , variety of software typesetting engraving and cutting. Professional high quality laser power supply and C02 laser tube.It supports RDworks and CoreldRAW and CAD software to engrave and cut. The Engraving and cutting color separation work at the same time. The different colors can be set for different engraving and cutting speeds. File formats are supported by RDworks software. DSP 130W 1060 C02 Laser engraving machine x 1. 80mm Rotary axis x 1. Spare key/limit switch/open cover protection switch/multimeter/electric iron. Can the machine engraving and cutting? Yes, even on the same Job, you can do setting with different color in the software. And it can work on same time.
Is the machine must work with computer? Must connect with computer with USB cable when you change the settings of machine.
For the design files, you can transfer the file with USB memory stick to the machine, Or can download it to the machine directly with USB cable from computer. Can the machine be split so it can fit into my doors? Sorry, it can't do. How long the laser tube is working well? Unfortunately we cannot confirm about this, it is about 0-7200 hours.Do you avaliable spare parts? We can provide all of spare parts of any model we listing. I have heard the mirrors need cleaning? Yes they do but not after every job, once a week is normally enough.
Can I put larger materials in the machine? No, the machine have not doors which opened to accommodate larger materials. How about the after sell service? Free tech support for the whole life of the machine, and 24 hours telephone support.A: Machine is always required to setup/install(NOT ready to use). Q: Do you solve hardware&software issue? Q: I received my machine but box was seriously damaged so machine was heavily damaged.
Q: I received my machine but I found tiny deformation on side panel. A: In this case, please check/test whether the machine works in order. If so, we send some gifts in small value.
Return is NOT accepted for such reason. We send some gifts in small value. Q: I receive my machine but it doesn't work in order for parts/accessories are broken.
A: I will send parts/accessories for free. Q: I receive my machine with a lot of scratches.
A: The machine was economic solution to business. Appearance was not care too much. It is NOT used, just born with.
Laser tube& power supply is consumption. Requiring evidence picture(s) or video(s) from you. Based on video, we will assist you to solve. In usual practice, the procedure may. Take 15 days to a month for issue recheck, video re-take, solution.
The item "130W laser cutter engraving machine & CW5200 Chiller Motorize up and down table" is in sale since Monday, September 10, 2018. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving".The seller is "usfocallaser" and is located in Ontario. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Canada, Australia.